FlashPro and oil sensor

Mityai · Post by **Mityai** » Sun Mar 21, 2010 4:37 am

After installing FlashPro disappeared from the dashboard oil pressure lamp!
Tell me - how can I make it work?

Post by **Hondata** » Sun Mar 21, 2010 7:48 am

Oil pressure or oil level? With the AFM or race calibration?

Mityai · Post by **Mityai** » Sun Mar 21, 2010 9:10 am

the red indicator on the dashboard.
no lights!

Mityai · Post by **Mityai** » Mon Mar 22, 2010 4:53 am

we have MAP-based race calibration

oil pressure lamp doesnot work at all

Post by **Hondata** » Mon Mar 22, 2010 7:48 am

What is your ECU part number? (37820-xxx-xxxx)

Mityai · Post by **Mityai** » Sat Mar 27, 2010 8:12 am

ECU 37820-RSP-E02

Post by **Hondata** » Mon Apr 05, 2010 10:29 am

Oil pressure or oil level?

The oil level warning is not going to work with the race calibration. The oil pressure warning should.

Mityai · Post by **Mityai** » Tue Apr 06, 2010 5:19 am

unfortunately, oil pressure does not work

we've checked all MAP calibrations attached with Flashmanager, and the same result.

No oil pressure lamp at all

Post by **Hondata** » Tue Apr 06, 2010 7:29 am

Can you access a wiring diagram for your vehicle and determine the pin used for the oil pressure input?

Mityai · Post by **Mityai** » Thu Apr 08, 2010 11:04 am

B7 pin, the same as on US Si civics

Post by **Spunkster** » Thu Apr 08, 2010 11:17 am

What has been modified on your Civic?

Mityai · Post by **Mityai** » Thu Apr 08, 2010 10:55 pm

Spunkster wrote:What has been modified on your Civic?

Nothing, only JR and FlashPro!

http://www.drive2.ru/cars/honda/civic_t ... 888287741/

Post by **Spunkster** » Fri Apr 09, 2010 4:15 pm

Have you checked continuity form the oil pressure sensor to the ECU pin?

Mityai · Post by **Mityai** » Fri Apr 09, 2010 9:37 pm

We tried to load back to the standard firmware fn2, oil pressure lamp works!

gasss_85 · Post by **gasss_85** » Sat Apr 17, 2010 9:24 am

Is the oil level warning going to work with the MAF calibration????

Is the oil pressure warning going to work with the MAF calibration????