fuel level gauge
Re: fuel level gauge
If i change (increase) this value, then the fuel gauge goes down quicker, but right?
Anything else:
Why we have no value to change the output type like this: Only on race cals we have this option, but without any effect if we change the value.
Anything else:
Why we have no value to change the output type like this: Only on race cals we have this option, but without any effect if we change the value.
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Re: fuel level gauge
hi, same thing here...neomasterxo2 wrote:
CAL was made by Vitviper and works perfectly INCLUDING dash
update flaspro --> same cal than before --> fuel Dash is crazy ^^
can't update injector for flow dash to a correct value :(
Re: fuel level gauge
On MAP-Cals this option is not available!
It is only available on MAF- or Hybrid-Cals!
This also has to do with the new software/firmware!
Use a MAF- or Hybrid-Cal to adjust it right!
It is only available on MAF- or Hybrid-Cals!
This also has to do with the new software/firmware!
Use a MAF- or Hybrid-Cal to adjust it right!
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Re: fuel level gauge
Hi Hondata,
i observe for several tanks of repeatedly following in my FN2 s/c (RC750cc) at Fuel Economy:
If i change "Injector flow for dash" value, i can set/vary the consumption indicator (currently/average) thats all correct, now! :)
But if i change the "Injector flow for fuel economy calc" value, whether i use 750cc, 850cc or 1000cc the fuel gauge falls always as same slow/fast down!
It is in any case (regardless of the value I put in) as follows:
- After I'm gone ~60 kilometers, the fuel gauge falls just down about 1 line at the gauge. -> Correctly the fuel gauge must falls down to 3/4 tank @ ~100 kilometers, but this is not the case!
- After ~200 kilometers the fuel gauge falls down to 1/2 tank.
- After ~300 kilometers the fuel gauge falls down to 1/4 tank.
- After ~400 Kilometers the fuel gauge falls down to empty (in approximately). -> Then I'm run on reserve or the reserve light comes on.
Is it possible to make the fuel gauge more accurate?
I have the impression if i change the value (cc) in this case, it does not make any differences/effects!
I even have the impression that this value affects the "Injector flow for dash" value something ?!
Can that be possible?
And yes, i try it always after a full tank or refuel the tank to completely full!
Thank you!
i observe for several tanks of repeatedly following in my FN2 s/c (RC750cc) at Fuel Economy:
If i change "Injector flow for dash" value, i can set/vary the consumption indicator (currently/average) thats all correct, now! :)
But if i change the "Injector flow for fuel economy calc" value, whether i use 750cc, 850cc or 1000cc the fuel gauge falls always as same slow/fast down!
It is in any case (regardless of the value I put in) as follows:
- After I'm gone ~60 kilometers, the fuel gauge falls just down about 1 line at the gauge. -> Correctly the fuel gauge must falls down to 3/4 tank @ ~100 kilometers, but this is not the case!
- After ~200 kilometers the fuel gauge falls down to 1/2 tank.
- After ~300 kilometers the fuel gauge falls down to 1/4 tank.
- After ~400 Kilometers the fuel gauge falls down to empty (in approximately). -> Then I'm run on reserve or the reserve light comes on.
Is it possible to make the fuel gauge more accurate?
I have the impression if i change the value (cc) in this case, it does not make any differences/effects!
I even have the impression that this value affects the "Injector flow for dash" value something ?!
Can that be possible?
And yes, i try it always after a full tank or refuel the tank to completely full!
Thank you!
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Re: fuel level gauge
Why are you using race calibrations? Is there something missing from the normal calibration?
Hondata
Re: fuel level gauge
I do not use a race calibration, but i use a maf-based calibration (hybrid)!!!Hondata wrote:Why are you using race calibrations? Is there something missing from the normal calibration?
Why do you think I use race calibration?
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Re: fuel level gauge
Hondata, please answer my question above!
I have this issue, if i use my, hybrid cal (maf-based with MAP-fuel-tables)!
I have this issue, if i use my, hybrid cal (maf-based with MAP-fuel-tables)!
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Re: fuel level gauge
Hondata, please read my posts above!
Thats my Problem:
"If i change the "Injector flow for fuel economy calc" value, whether i use 750cc, 850cc or 1000cc the fuel gauge falls always as same slow/fast down!"
The "Injector flow for fuel economy calc" option do not make any effect on a FN2!
What effect should have this option?
I thought with this option it is possible to manage how slow/fast the fuel gauge goes down!?
Thats my Problem:
"If i change the "Injector flow for fuel economy calc" value, whether i use 750cc, 850cc or 1000cc the fuel gauge falls always as same slow/fast down!"
The "Injector flow for fuel economy calc" option do not make any effect on a FN2!
What effect should have this option?
I thought with this option it is possible to manage how slow/fast the fuel gauge goes down!?
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Re: fuel level gauge
I use the full AFM calibration without ve tables... And use 750cc. But in this case the gauge drops to empty quicker although enough fuel is available.
Edit:
With 700cc the fuel gauge is feeled more correctly. We can test with 400cc and record the fuel consumption change if required.
I know that the fuel gauge was not correcly before the sc kit. So we are very happy if you can offer us more tuning tips.
Regards
Edit:
With 700cc the fuel gauge is feeled more correctly. We can test with 400cc and record the fuel consumption change if required.
I know that the fuel gauge was not correcly before the sc kit. So we are very happy if you can offer us more tuning tips.
Regards
Re: fuel level gauge
Yes, we would be ready to working on a solution, together with Hondata.
Similarly, we have also done it successfully in the average fuel consumption display/current fuel consumption display.
Thanks!
Similarly, we have also done it successfully in the average fuel consumption display/current fuel consumption display.
Thanks!
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Re: fuel level gauge
Hondata,
any news about this???
Please answer...
any news about this???
Please answer...
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Re: fuel level gauge
Hondata, do you work on a sulution?
Without an answer, I can not figure out!
Thank you!
Without an answer, I can not figure out!
Thank you!
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Re: fuel level gauge
I still can't see what you're getting at. If I read your last posts you're saying the fuel economy display works and the fuel level gauge is reading correctly. What, exactly, is the problem?
Hondata
Re: fuel level gauge
Hi Hondata,
thank you for answer!
The fuel economy display now works really good (after our troubleshooting).
But the fuel gauge does not working accurate/evenly, the fuel gauge falls always as same slow/fast down!
Even if i put in 750cc, 850cc or 1000cc, etc. in the input box, does not make a difference the behavior of the fuel gauge!
The input box for the fuel gauge "Injector flow for fuel economy calc" like this ones:
750cc put in -> 850cc put in -> 1000cc put in -> This indicator acts on the fuel gauge like this: It is in any case (regardless of the value I put in) as follows:
- After I'm gone ~60 kilometers, the fuel gauge falls just down about 1 line at the gauge.
-> Correctly the fuel gauge must falls down to 3/4 tank @ ~100 kilometers, but this is not the case!
- After ~200 kilometers the fuel gauge falls down to 1/2 tank.
- After ~300 kilometers the fuel gauge falls down to 1/4 tank.
- After ~400 Kilometers the fuel gauge falls down to empty (in approximately).
-> Then I'm run on reserve or the reserve light comes on.
The "Injector flow for fuel economy calc" option do not make any effect on a FN2!
What effect should have this option?
With this option it is possible to manage how slow/fast the fuel gauge goes down!?
Do you recognized my problem now?
thank you for answer!
The fuel economy display now works really good (after our troubleshooting).
But the fuel gauge does not working accurate/evenly, the fuel gauge falls always as same slow/fast down!
Even if i put in 750cc, 850cc or 1000cc, etc. in the input box, does not make a difference the behavior of the fuel gauge!
The input box for the fuel gauge "Injector flow for fuel economy calc" like this ones:
750cc put in -> 850cc put in -> 1000cc put in -> This indicator acts on the fuel gauge like this: It is in any case (regardless of the value I put in) as follows:
- After I'm gone ~60 kilometers, the fuel gauge falls just down about 1 line at the gauge.
-> Correctly the fuel gauge must falls down to 3/4 tank @ ~100 kilometers, but this is not the case!
- After ~200 kilometers the fuel gauge falls down to 1/2 tank.
- After ~300 kilometers the fuel gauge falls down to 1/4 tank.
- After ~400 Kilometers the fuel gauge falls down to empty (in approximately).
-> Then I'm run on reserve or the reserve light comes on.
The "Injector flow for fuel economy calc" option do not make any effect on a FN2!
What effect should have this option?
With this option it is possible to manage how slow/fast the fuel gauge goes down!?
Do you recognized my problem now?
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185