Hondata

Hondata wrote:Thanks for the testing. Because of the way different injectors are rated (voltage, pressure) the correct number for RC750s is probably around 800-850cc.

BTW now there are injectors with better spray patterns than the RC550, RC650 & RC750 injectors. On my car fuel economy improved and and spark plug fouling disappeared when I switched from RC750 to DW800.

Ok thank you, i will try this!

A user here has written as follows in conjunction with the TTS intake manifold of my rotrex supercharger kit!:
"You can't install other injectors than RCs on TTS intake without modifying it"

Can you post picture of the DW800 how to look like?

The TTS intake manifold looks like that: And the Injectors clip into the intake manifold into the grooves (red mark in the picture above on the intake manifold): The RC Injectors and adapter-clips looks like that: I don't know if that fits?! :(

Hi,
Test looks very good I will test the new version on Sunday evening my car is currently in the fair: tuning world bodensee 2015

Hondata can you post the dimensions of your dw 800cc injectors and their clips please? So we can check if it possible to change the injectors to the DWs without modify the manifold.

I will post my results too.

Thanks a lot for you're Support.

Hondata wrote:Thanks for the testing. Because of the way different injectors are rated (voltage, pressure) the correct number for RC750s is probably around 800-850cc.

BTW now there are injectors with better spray patterns than the RC550, RC650 & RC750 injectors. On my car fuel economy improved and and spark plug fouling disappeared when I switched from RC750 to DW800.

What number must i put in, if i use your DW800 injectors?

Thanks!

I think:
http://www.deatschwerks.com/products/fu ... 0-4-detail

800cc Fuel Injectors
Product SKU: 21U-01-0800-4

Hondata, please confirm.

typer86 wrote:I think:
http://www.deatschwerks.com/products/fu ... 0-4-detail

800cc Fuel Injectors
Product SKU: 21U-01-0800-4

Hondata, please confirm.

Yes! :)

We do not carry the DW injectors now, and you'll have to contact DW for the dimensions,

I have already emailed DW and waiting for response!
Thank you!

How long the Power-LED from the FlashPro will blinking in firmware update mode? After installing the Testversion of flash pro manager the flash pro needs a firmware update... How long it takes, approximately? Previously v2.1.3 was installed - Ok it is finished.

20 minutes after start it was finished. Strange

It takes ca. 1 minute, Not longer!

R-12914 wrote:It takes ca. 1 minute, Not longer!

I was in trouble with my USB stack - it cause the problem. It was fixed very easly after troubleshooting.
> I unplugged two more devices - after that it was finished very fast.

Thanks Matthias ;)

Here my results: with 800cc in both fields:

How do you manage to ride the CTR S/C with 8.5 liters?
Do you find the gas-pedal? :D ;)

Greetings,
Matthias

My fuel tank was very empty at this morning. I could not trust the fuel gauge so I will refuel today and then I take a look of the ride bar if correct. :-D
And I am back in the action!

Congratulations hondata, this "beta" software works fine.

Thanks for the feedback.

Yahhh Hondata, it works fine :)
At the moment I am testing with the 750 / 749cc value. Maybe the 770 is the correct value for the Rotrex S/C K20.
More details in next weeks...

Feedback:
The consumption with 800cc values are a little to high which is displayed on the board computer. In normal drive with low boost it displays 9/10 Liters. That is to high and does not match with the gas bill.

The fuel gauge is also fixed with this beta version :) nice work!