Throttle dampening!

FlashPro questions & answers specific to the FN2 European Civic Type R
Post Reply
User avatar
R-12914
Posts: 349
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Throttle dampening!

Post by R-12914 »

In Flashpro Manager we have the option under "Throttle" -> "Throttle Parameters" = "1st gear throttle dampening enabled".
If we activate this option, the thottle opening speed is lower in first gear when the vehicle is moving.

My question:
Is it possible to allow/activate this option also in all gears (1-6, reverse) to dampening the jerky throttle response.

Could Hondata make this possibility?
I would like to test this.

In principle it should be possible for all gears, because there is also possible for the 1st gear!

Here is that what i mean:
TD.jpg
TD.jpg (28.97 KiB) Viewed 4543 times
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
typer86
Posts: 342
Joined: Sun Oct 28, 2012 3:17 pm

Re: Throttle dampening!

Post by typer86 »

Try this option. This will smooth the shifting and eliminate the jerks in higher gears if you press the clutch.
Attachments
tip-in.PNG
tip-in.PNG (5.67 KiB) Viewed 4537 times
pepperdanky
Posts: 81
Joined: Mon Oct 14, 2013 6:14 am

Re: Throttle dampening!

Post by pepperdanky »

The throttle dampening does apply to all gears. It is just most noticeable in 1st.
Post Reply