Overrun Throttle Opening

FlashPro questions & answers specific to the FN2 European Civic Type R
Post Reply
D33@+H-Kn1gH+
Posts: 23
Joined: Thu Mar 09, 2017 4:05 am

Overrun Throttle Opening

Post by D33@+H-Kn1gH+ »

Is there any way to compensate with overrun throttle opening when is enabled? I have a supercharged Type R FN2 and when the setting is enabled the quickest i press the clutch and the higher the RPM when I press it the revs jump even further (300-400rpm more) from the point they were when i pressed the clutch and then they drop down. I tried lowering the fuel cut delay with no luck. This problem only goes away when i disable the overrun throttle opening but I installed a high flow catalytic converter now and I want to be cooling it down by having this setting enabled.
User avatar
R-12914
Posts: 349
Joined: Sun Dec 01, 2013 12:13 pm
Location: Germany/Bavaria

Re: Overrun Throttle Opening

Post by R-12914 »

Do you have a datalog of this issue?
What supercharger do you have?
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
D33@+H-Kn1gH+
Posts: 23
Joined: Thu Mar 09, 2017 4:05 am

Re: Overrun Throttle Opening

Post by D33@+H-Kn1gH+ »

R-12914 wrote: Mon Jun 19, 2017 12:24 pm Do you have a datalog of this issue?
What supercharger do you have?
I have a rotex C30-94 with blow off. As soon as I have some time available I will record and post a datalog
Post Reply