Continental Ethanol sensor problem

FlashPro questions & answers specific to the FN2 European Civic Type R
Post Reply
mladjan
Posts: 120
Joined: Fri Sep 23, 2016 7:16 am

Continental Ethanol sensor problem

Post by mladjan » Tue Apr 03, 2018 7:07 am

I bought and installed this sensor: https://www.ebay.co.uk/itm/122012682233 ... 2012682233
But it gives me readings (out pin) around 5v even inside tank is regular pump fuel.
Even when I disconnect power and ground, that wire which goes to ECU (ECT2 pin) gives ~4.2V, and in flashpro manager value is changing from 50 to 100% fast.
Double checked this pin on ecu.
Second ECT sensor enabled - UNCHECKED
Ethanol input set to ECT2

Where is the problem?

User avatar
Spunkster
Site Admin
Posts: 17998
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Continental Ethanol sensor problem

Post by Spunkster » Tue Apr 03, 2018 11:09 am

What controller are you using with the sensor?

mladjan
Posts: 120
Joined: Fri Sep 23, 2016 7:16 am

Re: Continental Ethanol sensor problem

Post by mladjan » Tue Apr 03, 2018 11:44 am

Im not using controller. Isn't sensor itself only required?

User avatar
Spunkster
Site Admin
Posts: 17998
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Continental Ethanol sensor problem

Post by Spunkster » Tue Apr 03, 2018 12:04 pm

You must use a controller or it will not work.

mladjan
Posts: 120
Joined: Fri Sep 23, 2016 7:16 am

Re: Continental Ethanol sensor problem

Post by mladjan » Tue Apr 03, 2018 12:08 pm

Which controller you are suggesting me to use with continental sensor?

User avatar
Spunkster
Site Admin
Posts: 17998
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Continental Ethanol sensor problem

Post by Spunkster » Tue Apr 03, 2018 1:57 pm


Post Reply