A walk through needed

FlashPro questions & answers specific to the FN2 European Civic Type R
Post Reply
philjk
Posts: 17
Joined: Wed Jan 17, 2018 5:31 pm

A walk through needed

Post by philjk »

I've never used the flashpro myself. Ive had my rotrex supersport fn2 tuned and the tuner has left the calibration unlocked so i can enter fuel gauge calibration.The kit has 750cc injectors and i at present is set to 1000 in the fuel part of the cal.
This is a bit high and i want to lower the value to 800.

can anyone offer an idiots guide on how i can do this please?
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: A walk through needed

Post by Spunkster »

Open the calibration, go tot he fuel section in the calibration window, then change the values to what you want, and upload to the ECU.
philjk
Posts: 17
Joined: Wed Jan 17, 2018 5:31 pm

Re: A walk through needed

Post by philjk »

Thanks, just altered the settings. Thought there was more to it and was a little concerned I might break something.
Post Reply