K20Z4 Base Map

FlashPro questions & answers specific to the FN2 European Civic Type R
Post Reply
Crx_AA
Posts: 3
Joined: Sat Aug 31, 2019 1:26 pm

K20Z4 Base Map

Post by Crx_AA »

Hello,

Recenty i swap my crx with k20z4 install Kpro v2 and need a base map to tune a car. Car run's great but vtec dont open. Now i'm running k20a2 base map
BumbleWood
Posts: 1
Joined: Wed Dec 04, 2019 7:10 am

Re: K20Z4 Base Map

Post by BumbleWood »

Not sure if I'm allowed to share a map but this is a basic Fn2 (k20z4)map the only mod is a gruppe m induction change.It was done by a really good uk based tuner and tested on a notoriously tight Dyno and made 195hp and the car drives lovely in the middle gears loads of 3rd and 4th gear pull between 45 and 85 mph B Road driving is a real laugh.
Hope it helps.
Attachments
FN2romaine.fpcal
Fn2 romaine
(19.06 KiB) Downloaded 288 times
typer86
Posts: 342
Joined: Sun Oct 28, 2012 3:17 pm

Re: K20Z4 Base Map

Post by typer86 »

Iam not sure if kpro working with the RSP based ECU.
If you are using the K20a ECU check the wires and sensors, groundings etc.
Br
Post Reply