FlashPro Manager feature request thread

FlashPro Manager software
Post Reply
jun1or
Posts: 137
Joined: Tue Apr 14, 2009 10:09 am

FlashPro Manager feature request thread

Post by jun1or » Fri Aug 26, 2011 9:16 pm

FlashPro Manager Feature Requests:
1.) Clear lambda overlay feature, like in sManager (control+L).
2.) Ability to overlay lambda without recording.
2.) Show target lambda overlay values as a table (like sManager). How about an entire table of target lambda instead of low/med/high?
3.) Unified backup menu, or .ini file, or both (i.e. one .ini file versus four - Graph, Settings, Displays, Sensors)
4.) Boost Control Quick Spool unit adjustment (currently only bar, suggest unit to change with boost control activation pressure dropdown above it)
5.) Change default boost control frequency to 25% (much more usable range of duty, will reduce future forum threads/questions)
6.) *Minor - Update help file regarding wideband input not needing resistor anymore (if you feel that is accurate now).
7.) Boost control solenoid dead time table (see page 63 for example: http://www.mpsracing.com/instructions/h ... struct.pdf)

Many thanks,

Mike
Last edited by jun1or on Thu Oct 10, 2013 10:34 am, edited 2 times in total.

jun1or
Posts: 137
Joined: Tue Apr 14, 2009 10:09 am

Re: FlashPro Manager feature request thread

Post by jun1or » Tue Oct 01, 2013 12:34 pm

(edited post #1)
Last edited by jun1or on Thu Oct 10, 2013 10:34 am, edited 1 time in total.

jun1or
Posts: 137
Joined: Tue Apr 14, 2009 10:09 am

Re: FlashPro Manager feature request thread

Post by jun1or » Thu Oct 10, 2013 10:31 am

Added #7 to post #1


Others feel free to chime in and I will add it to post #1.

jun1or
Posts: 137
Joined: Tue Apr 14, 2009 10:09 am

Re: FlashPro Manager feature request thread

Post by jun1or » Sat Aug 10, 2019 2:10 am

Bump,

After further review and years of use and abuse, the following features would be wonderful, if feasible.

A.) Show target lambda overlay values as a table (like sManager). How about an entire table of target lambda instead of low/med/high?
B.) Boost Control Quick Spool unit adjustment (currently only bar, suggest unit to change with boost control activation pressure dropdown above it)

Post Reply