Hondata

Dear all.

How to.activate the auto.tuning function.

Currently the tab is unshaded and I can't select it

Many thanks

You may want to read what others have posted at:

http://www.8thcivic.com/forums/hondata/ ... shpro.html

http://flashprotuning.com/forums/viewto ... f=10&t=394


You must have the fuel tables set to live tune and then you must activate the autotune

http://www.hondata.com/help/flashpro/li ... htsub=live

http://www.hondata.com/help/flashpro/au ... b=autotune

They it was very good information for both forum.

One last question.... can I know when does flashpro auto tune again every time I upload the program after a long trip of auto tuning already

Thanks in advance

They it was very good information for both forum.

One last question.... can I know when does flashpro auto tune again every time I upload the program after a long trip of auto tuning already

Thanks in advance

IT will autotune as long as you have the live tuning tables enabled and the auto tune function turned on.

Many thanks for the help so far.

One last things. My auto tune fuction time out/ log out after a few mins. Can I know why. Currently longest I can auto tune is 2mins......

Thanks

Spunkster wrote:IT will autotune as long as you have the live tuning tables enabled and the auto tune function turned on.

Does Autotune function works in JDM FD2 ECU? Seems cannot turn it on...
Thx!

Yes, enable live tuning for the fuel tables and then set the autotune settings.

Could you please suggest me the lambda overlay figures (min & max) in Autotune condition setting for my JDM FD2 NA? Thx

Hello all. I have made a through video about how to use and tune it with autotune.

I even tuned my turbo with it. High and low fuel tables and other stuff with tips. Will be happy if it helps someone who wants to use this powerful feature

Car is Honda Fit swapped k24a2 turbo using Civic Si (2007-11,FG2) ECU.

https://youtu.be/G2ukmAB4O50