Page 1 of 25

FlashPro Requests

Posted: Mon Apr 07, 2014 1:40 pm
by Hondata
Any FlashPro / FlashProManager requests belong in this thread.

Re: FlashPro Requests

Posted: Mon Apr 07, 2014 6:11 pm
by thatguyinms
Instantaneous mpg and Avg MPG for datalog please!

Re: FlashPro Requests

Posted: Mon Apr 07, 2014 6:23 pm
by VitViper
Selective cylinder drop so my 8th gen won't be so lame compared to my DC2...

Re: FlashPro Requests

Posted: Tue Apr 08, 2014 12:37 am
by s-easy
Boost control, wideband lambda input, gear/main ratio adjust for R18 Civic FlashPro

Re: FlashPro Requests

Posted: Tue Apr 08, 2014 12:51 am
by Jean-Lo
Rev-light for FN2 Euro with race calibration.
The possibility to compare two log (or more) on one window.
Maybe a system who calculate approximate horsepower (you know all gears ratio, all acceleration information with log, just need tyre size and weight's info.)

Re: FlashPro Requests

Posted: Tue Apr 08, 2014 1:44 am
by IcEMoCHa
Some suggestions..

1. Option of using CEL to indicate knocking.

2. Change cam angle preset value for fuel and ign map. (have 5, 10, 15, 20, 25 cam angle)

Re: FlashPro Requests

Posted: Tue Apr 08, 2014 2:39 am
by VitViper
IcEMoCHa wrote:Some suggestions..

1. Option of using CEL to indicate knocking.

2. Change cam angle preset value for fuel and ign map. (have 5, 10, 15, 20, 25 cam angle)
Both options already exist and work well.

Re: FlashPro Requests

Posted: Tue Apr 08, 2014 2:43 am
by VitViper
Couple more

- Ignition cut for the rev limiter in addition to fuel cut. I'm really annoyed that my built motor spins past the rev limiter by almost 1000 rpm... I can do a quasi ignition cut by playing with the ignition tables, but it's just not the same...
- Ignition cut for the launch control

- And a big one for me right now: ANTI-LAG for the launch control (granted it's not even really launch control yet...) My 67mm turbo doesn't make any boost to speak of while staging, really sucks.

Re: FlashPro Requests

Posted: Tue Apr 08, 2014 5:54 am
by angelf1974
Gear/main ratio adjust for TSX

Re: FlashPro Requests

Posted: Tue Apr 08, 2014 7:21 am
by IcEMoCHa
VitViper wrote:
IcEMoCHa wrote:Some suggestions..

1. Option of using CEL to indicate knocking.

2. Change cam angle preset value for fuel and ign map. (have 5, 10, 15, 20, 25 cam angle)
Both options already exist and work well.
Oh? Don't see that option in MAP based calibrations though.

How can I change the cam angle to 0, 10, 20, 25, 30 instead of 0, 15, 30, 40, 50?

Re: FlashPro Requests

Posted: Tue Apr 08, 2014 10:02 am
by Diogo Oliveira
IcEMoCHa wrote:
VitViper wrote:
IcEMoCHa wrote:Some suggestions..

1. Option of using CEL to indicate knocking.

2. Change cam angle preset value for fuel and ign map. (have 5, 10, 15, 20, 25 cam angle)
Both options already exist and work well.
Oh? Don't see that option in MAP based calibrations though.

How can I change the cam angle to 0, 10, 20, 25, 30 instead of 0, 15, 30, 40, 50?
You cant change it on MAP based cals, only with Hibrid cals......MAP cals are no longer updated and should only be used at race cars.

Re: FlashPro Requests

Posted: Tue Apr 08, 2014 6:02 pm
by VitViper
IcEMoCHa wrote:
VitViper wrote:
IcEMoCHa wrote:Some suggestions..

1. Option of using CEL to indicate knocking.

2. Change cam angle preset value for fuel and ign map. (have 5, 10, 15, 20, 25 cam angle)
Both options already exist and work well.
Oh? Don't see that option in MAP based calibrations though.

How can I change the cam angle to 0, 10, 20, 25, 30 instead of 0, 15, 30, 40, 50?
Race calibrations have been unsupported for ages, don't even bother asking for updates... lol

Re: FlashPro Requests

Posted: Tue Apr 08, 2014 6:15 pm
by DomGSR-T
TL guys wants/needs those upgrades:

•[2006 Civic Si] Added parameter to enable full closure of throttle plate on deceleration & throttle opening vs flow table.
•[2012+ Civic Si, ILX] Added minimum throttle opening compensation table to allow for full closure of throttle plate on deceleration.

Re: FlashPro Requests

Posted: Wed Apr 09, 2014 6:26 am
by IcEMoCHa
VitViper wrote: Race calibrations have been unsupported for ages, don't even bother asking for updates... lol
Sadly Hondata got no love for us in Asia. We only get race cal. So another request for hondata:

Please release a base hybrid calibration for all cars that are able to run it. *fingers crossed*

Re: FlashPro Requests

Posted: Wed Apr 09, 2014 9:04 am
by romeochris
Any add on bluetooth module for older FP?