AEM 4-Channel Wideband Air/Fuel UEGO Controller

FlashPro Manager software
Post Reply
_Mozz_
Posts: 46
Joined: Mon Nov 02, 2009 7:34 am

AEM 4-Channel Wideband Air/Fuel UEGO Controller

Post by _Mozz_ »

Can I run the AEM 4-Channel Wideband Air/Fuel UEGO Controller with the FlashPro?

Thanks
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: AEM 4-Channel Wideband Air/Fuel UEGO Controller

Post by Spunkster »

You will only be able to log one channel at a time as there is only one input available for wideband input.
_Mozz_
Posts: 46
Joined: Mon Nov 02, 2009 7:34 am

Re: AEM 4-Channel Wideband Air/Fuel UEGO Controller

Post by _Mozz_ »

Thanks for the Reply.

Such a shame!! One step behind Kpro. . . We can not run ITBs, can not run 4-channel Wideband . . :-(

So, the only way to get acurate indivudual fuel tune for a Big Motor using FlashPro, would be to run parallel logs, with the AEM just there to monitor the individual AFR and then Correct it on the FUEL TRIM on FlashPro?
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: AEM 4-Channel Wideband Air/Fuel UEGO Controller

Post by Spunkster »

You would have to switch the outputs each time you wanted to log a different cylinder.
Post Reply