Page 1 of 6

FlashProManager v2.2.8

Posted: Fri Oct 03, 2014 1:01 pm
by Hondata
V1.9.5 (3 Oct 2014)
  • FlashPro firmware updated to version 68
  • [RDX] Added P0234 boost cut min IAT & ECT.
  • [2006 Civic Si] Fixed datalogging MAP above 255 kPa.
  • [2006 Civic Type R] Added radiator fan control, TPS WOT determination tables, MAP to high/low error enable, and VTEC activation conditions.
  • Added 2011-2014 model TSX
  • [S2000] Fixed old calibrations loading wrong fuel pressure.
V1.9.6 (14 Nov 2014)
  • FlashPro firmware updated to version 68
  • [RDX] Fixed MAP reading.
V1.9.7 (21 Nov 2014)
  • Fixed TSX AT throttle tables when converting calibrations.
V1.9.8 (24 Nov 2014)
  • Fixed recovery mode after uploading for some TSX ECUs
V1.9.9 (1 Dec 2014)
  • Fixed datalogging for the RDX
V2.0.0 (8 Dec 2014)
  • FlashPro firmware updated to version 72
  • 2012-2013 R18 Support
V2.0.1 (18 Dec 2014)
  • FlashPro firmware updated to version 73
  • [R18 2012+ ] Added launch limit
  • [TSX 2011+] Fixed datalogging from FlashPro
V2.0.3 (14 Jan 2015)
  • FlashPro firmware updated to version 75
  • [TSX 2011+ & RDX] Fixed datalogging from FlashPro
  • [S2000] Added throttle angle vs flow table.
  • [Civic R18] Added support for US 2014 MT models
V2.0.4 (15 Jan 2015)
  • FlashPro firmware updated to version 76
  • Fixed upload via button
V2.0.6 (19 Jan 2015)
  • FlashPro firmware updated to version 78
  • Fixed locking with new FlashPros
V2.0.7 (2 Mar 2015)
  • FlashPro firmware updated to version 79
  • Added Quick Support
  • [Civic R18] Added support for US 2014 CVT models
V2.0.8 (2 Mar 2015)
  • [Civic R18] Added support for more ECU parts
V2.0.9 (9 Mar 2015)
  • [TSX 2011+] Fixed high cam VE fuel tables
V2.1.0 (9 Mar 2015)
  • [R18 2014] Add support for more models
V2.1.3 (9 Apr 2015)
  • [06-11 Civic Si] Added throttle P2101 error conditions
  • [RDX] Added VSA torque limiting flag
  • Added support for 2013+ L4 Accord
V2.2.3 (15 May 2015)
  • [RDX] Fixed cylinder ignition compensation label
  • [RDX] Added factory boost limit min rpm and max ignition retard.
  • [2006-2011 Civic Type R] Added fuel consumption and fuel used datalog sensors.
  • [2006-2011 Civic Type R, 07-08 TSX] Added trip meter fuel injector size.
  • USB drivers updated to v1.0.3 (Microsoft Hardware Certified)
V2.2.6 (4 June 2015)
  • FlashPro firmware updated to version 85
  • Added 2013-15 Accord V6 support
V2.2.7 (13 July 2015)
  • Fixed problem where old software version show out of date once updated to 2.2.6
V2.2.8 (20 July 2015)
  • Test fix for 2013+ V6 Accord EGR
Download here

Re: FlashProManager v1.9.5

Posted: Sat Oct 04, 2014 9:32 pm
by VitViper
The 2011-14 TSX support, using the same FP as the previous year's TSX? Just confirming so I don't sell customers the wrong FP...

Re: FlashProManager v1.9.5

Posted: Mon Oct 06, 2014 9:17 am
by Hondata
Yes, all TSX use the same FlashPro.

Re: FlashProManager v1.9.5

Posted: Thu Oct 09, 2014 6:22 am
by BEKA-BEKA
Does "Fixed datalogging MAP above 255 kPa" available also for Civic R18? As maximum MAP pressure reading is also 23psi, despite the actual value is more than that.

Re: FlashProManager v1.9.5

Posted: Thu Oct 09, 2014 9:31 am
by Hondata
No, we did not make the same change to the R18 for the release. We have now.

Re: FlashProManager v1.9.5

Posted: Wed Oct 15, 2014 8:06 am
by the_wrench116
Hondata wrote:V1.9.5 (3 Oct 2014)
  • FlashPro firmware updated to version 68
  • [RDX] Added P0234 boost cut min IAT & ECT.
  • [2006 Civic Si] Fixed datalogging MAP above 255 kPa.
  • [2006 Civic Type R] Added radiator fan control, TPS WOT determination tables, MAP to high/low error enable, and VTEC activation conditions.
  • Added 2011-2014 model TSX
  • [S2000] Fixed old calibrations loading wrong fuel pressure.
Download here
RDX] Added P0234 boost cut min IAT & ECT.
we cant see the boost pressure any more. im only able to check it on torque app for android.

Re: FlashProManager v1.9.5

Posted: Wed Oct 15, 2014 9:39 am
by Spunkster
Can you please elaborate on what you mean.

Re: FlashProManager v1.9.5

Posted: Fri Oct 17, 2014 8:15 pm
by the_wrench116
the map/psi pictured never changes even though I can change its settings in the boost screen.

Re: FlashProManager v1.9.5

Posted: Mon Oct 20, 2014 9:55 am
by Spunkster
This will be fixed in the next beta release.

Re: FlashProManager v1.9.5

Posted: Thu Oct 23, 2014 7:01 am
by the_wrench116
thanks. can't wait.

Re: FlashProManager v1.9.7

Posted: Sun Nov 23, 2014 9:36 pm
by J.Dre
I'm not sure how to explain this, but the completion of the upload of a calibration is different with 1.9.7. The ECU used to make a sound, as if it were restarting, when the upload is complete. The 1.9.7 beta does not do this. It causes additional dings/warnings to go off after the calibration is done uploading.

Was this changed? Or is something wrong with the upload process (to the vehicle) with 1.9.7 beta?

Re: FlashProManager v1.9.7

Posted: Mon Nov 24, 2014 8:56 am
by Hondata
For what vehicle? Does it ask you to cycle the ignition?

Re: FlashProManager v1.9.7

Posted: Mon Nov 24, 2014 9:12 am
by J.Dre
Hondata wrote:For what vehicle? Does it ask you to cycle the ignition?
'13 Civic Si. I follow the same process as always. I went from 1.9.3 to 1.9.7 (beta) - firmware upgraded.

With 1.9.7 (beta), when the red light stops flashing on the FlashPro, the ECU does not make a sound (like it used to with the previous Firmware) and now more warnings/dings go off - multiple warnings, including ABS, etc. So, I don't know if the calibration is being uploaded or not. I did it two times in a row just to make sure, but the upload process seemed to be messed up.

With 1.9.3, I would hear the ECU restart and that would indicate the upload was successful. No warnings/dings after that, only during the upload.

Re: FlashProManager v1.9.7

Posted: Mon Nov 24, 2014 2:16 pm
by Hondata
How are you uploading? From the FlashPro using the button or with a laptop?

Re: FlashProManager v1.9.7

Posted: Mon Nov 24, 2014 3:51 pm
by J.Dre
Hondata wrote:How are you uploading? From the FlashPro using the button or with a laptop?
The FlashPro device.