FlashProManager V2.8.7
Re: FlashProManager V2.8.7
So using a window switch to a relay controlling a 5v source instead of the ethanol sensor. Would this work for a dry nitrous system? Could you retard timing and add fuel with the 5 volt signal?
Re: FlashProManager V2.8.7
It might work, but we would not recommend it since the ethanol input is designed for flex fuel.
Hondata
Re: FlashProManager V2.8.7
Yes,
this function is unfortunately no longer available, since the change to set the "launch limiter" and "full throttle shift", etc. in FP-manager.
Actually, Honda has installed this function for engine protection in standstill (protection against overheating)!
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185