Ok so im having trouble connecting my wideband gauge to my 2013 r18 civic. I followed the instructions and disabled ELD and tapped into ELD @ A34(green wire in middle of "A" connector).
Now the issue is once I disconnect the factory wire from that pin the cooling fans run wideopen, cel for coolant temp too high and a few others. ive counted the pins multiple times to be sure im in the correct one but something has to be up.
There has gotta be something im missing, any ideas or a ecu pinout diagram would be greatly appreciated.
wibeband install multiple CEL
wibeband install multiple CEL
boosted 2013 civic r18
Re: wibeband install multiple CEL
It sounds like you have the wrong pin. I would recommend that you double check your counting for that pin. According to the Honda service info it should be an orange wire.
Re: wibeband install multiple CEL
I have an orange wire @ 24 and 9 ?
tried to get the best pictures I could
boosted 2013 civic r18