Calibrations will not update

FlashPro Manager software
Post Reply
Sway
Posts: 4
Joined: Thu Feb 07, 2019 10:01 am

Calibrations will not update

Post by Sway » Fri Apr 05, 2019 7:30 pm

I decided to reflash my car with an updated basemap tune today after work and i noticed that the emissions cel keeps popping up everytime i start my car up. Driving hasn't changed all that much, but i also noticed remote starting my car seems to not function properly either. When the vehicle is remote started, it cuts off and dies/stalls out shortly after turning on.

After a little bit of research, and a lot of back and forth shenanigans, trying over and over uploading basemaps, modifying things here and there, keeping everything as is and still no luck.. I've accepted defeat.

Here's a video illustrating exactly what's going on @ my end on my desktop. https://youtu.be/2B4cb0oZ99Q

I should also note that all seems fine with my device in the flashpro manager software on all of my computers, no errors or anything...

Sway
Posts: 4
Joined: Thu Feb 07, 2019 10:01 am

Re: Calibrations will not update

Post by Sway » Fri Apr 05, 2019 7:38 pm

in addition to the issues i am having with updating my flashpro-

Image

I'm surprised it even let me reflash my car, but now I'm not too sure what I'm supposed to do..

User avatar
Hondata
Site Admin
Posts: 8771
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Calibrations will not update

Post by Hondata » Fri Apr 05, 2019 9:37 pm

What vehicle, ECU and calibration?
Hondata

Sway
Posts: 4
Joined: Thu Feb 07, 2019 10:01 am

Re: Calibrations will not update

Post by Sway » Sat Apr 06, 2019 8:38 am

It's a 2016 civic sedan ext, the Calibration I am using is the +6 psi basemap for the 2016 1.5t with cvt, prior to this update, I had no issues with the basemap for my car. I don't have access to a computer right now, but I'll post my ecu in a few when I do.

User avatar
Hondata
Site Admin
Posts: 8771
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Calibrations will not update

Post by Hondata » Sun Apr 07, 2019 7:55 am

Have you had the oil dilution update from Honda? Did they reflash the transmission computer?

With the 2016 you may have to use a 2017 calibration if the transmission TCM has been reflashed.
Hondata

Sway
Posts: 4
Joined: Thu Feb 07, 2019 10:01 am

Re: Calibrations will not update

Post by Sway » Sun Apr 07, 2019 12:56 pm

Hondata wrote:
Sun Apr 07, 2019 7:55 am
Have you had the oil dilution update from Honda? Did they reflash the transmission computer?

With the 2016 you may have to use a 2017 calibration if the transmission TCM has been reflashed.
I managed to get everything back to normal by using the 2016-2017 basemap, and I have had that recall performed on my vehicle.

Post Reply