Cam angle map info??

FlashPro Manager software
Typersam
Posts: 34
Joined: Sun Mar 31, 2019 2:46 pm

Cam angle map info??

Post by Typersam »

Hi guys, sure it's a very easy question but on the cam angle maps on hondata if I selects the 0 degrees map for instance why in that map are there angles that are not 0 degrees?? It's the same thing with all the other degrees. Cheers
User avatar
Spunkster
Site Admin
Posts: 19350
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Cam angle map info??

Post by Spunkster »

The cam angle maps are populated with the values for the amount of cam advance you want. The only time you can look at the tables for specific cam angles is in the fuel and ignition tables.
Typersam
Posts: 34
Joined: Sun Mar 31, 2019 2:46 pm

Re: Cam angle map info??

Post by Typersam »

Mmm still don't get it lol so when I use the drop down menu and look at 10degree map and see values from 0-40 etc why aren't they all 10? What do the numbers represent? I know they are cam aims but why are there higher than 10 cam aims in the 10 degree cam map?
User avatar
Spunkster
Site Admin
Posts: 19350
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Cam angle map info??

Post by Spunkster »

What vehicle are you referring to?
Typersam
Posts: 34
Joined: Sun Mar 31, 2019 2:46 pm

Re: Cam angle map info??

Post by Typersam »

Type r fn2 K20Z bro
Typersam
Posts: 34
Joined: Sun Mar 31, 2019 2:46 pm

Re: Cam angle map info??

Post by Typersam »

Watched a few videos but still don't fully understand
User avatar
Spunkster
Site Admin
Posts: 19350
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Cam angle map info??

Post by Spunkster »

Have you read the info in the help file: https://www.hondata.com/help/flashpro/t ... or_vtc.htm
Typersam
Posts: 34
Joined: Sun Mar 31, 2019 2:46 pm

Re: Cam angle map info??

Post by Typersam »

I have bro but I still lile I need a better explanation of hoe the tables are used
User avatar
Spunkster
Site Admin
Posts: 19350
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Cam angle map info??

Post by Spunkster »

Please read the info at:
https://www.hondata.com/tech-rsx-vtec-vtc
https://www.hondata.com/tech-vtec-crossover

The VTC table has a composite map that has the best cam advance settings for making power.
Typersam
Posts: 34
Joined: Sun Mar 31, 2019 2:46 pm

Re: Cam angle map info??

Post by Typersam »

Yeh I understand what the principles are bro...but I mean you have to tune earth cam angle map right? I just don't get how we tune 10 degree map with other numbers than 10. Lile on low load why does the 10 degree angle map have 25 and that in it? I've attached a pic
Typersam
Posts: 34
Joined: Sun Mar 31, 2019 2:46 pm

Re: Cam angle map info??

Post by Typersam »

Screenshot_20190507-182414.png
Screenshot_20190507-182414.png (4.26 MiB) Viewed 2559 times
User avatar
Spunkster
Site Admin
Posts: 19350
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Cam angle map info??

Post by Spunkster »

The CAM angle map tells it which cam angle fuel and ignition map to use for that load.
Typersam
Posts: 34
Joined: Sun Mar 31, 2019 2:46 pm

Re: Cam angle map info??

Post by Typersam »

But there is numbers in the middle that are different to 0 degrees cam angle....surely the 25/35 degrees should be in the 30/40 degree mps from drop down menu??
curtusz
Posts: 206
Joined: Sat Jun 01, 2013 10:14 am
Location: Wakefield/Leeds uk

Re: Cam angle map info??

Post by curtusz »

Edit all the tables to 0 degrees and tune then to 10 degrees then tune.. ect .. then once you've done it all set the cam angles to where you make peak torque
Typersam
Posts: 34
Joined: Sun Mar 31, 2019 2:46 pm

Re: Cam angle map info??

Post by Typersam »

Yeh I just don't understand why in the drop down menu of "0 degrees" there are values of 25/35 etc
Post Reply