Problem Hondata Flashpro
Re: Problem Hondata Flashpro
I have it but it doesn't work
Re: Problem Hondata Flashpro
My apologies, but there are two problems here (s2000 and non s2000) and the non s2000 problem is fixed with a software release yesterday.
Bociak : that's an old version.
Everyone else, please send the feedback information.
Bociak : that's an old version.
Everyone else, please send the feedback information.
Hondata
Re: Problem Hondata Flashpro
Then the link to the latest version, which I downloaded yesterday, was from:
https://www.hondata.com/software
Re: Problem Hondata Flashpro
Clear you browser cache and download again. The compile date should be Mar 28 not Mar 20.
Hondata
Re: Problem Hondata Flashpro
Ok. Feedback was sent from " niedlacb.botku@gmail.com "
Re: Problem Hondata Flashpro
It was a pleasant surprise to wake up and see you had already responded, I do appreciate your attention and I'll give credit when it's due.
I just sent feedback through FlashPro Manager. I couldn't figure out how to attach screenshots there so I'll post the ones I took here.
- Attachments
-
- FP Status.png (10.38 KiB) Viewed 3451 times
-
- FP Fail Message.png (6.57 KiB) Viewed 3451 times
-
- FP Calibration Fail.png (7.28 KiB) Viewed 3451 times
-
- FP Build Info.png (24.67 KiB) Viewed 3451 times
Re: Problem Hondata Flashpro
Well, now we have to wait for a positive solution to the problem :)
Re: Problem Hondata Flashpro
Bociak: your FlashPro is 3.5.4 but the last upload was from the older version 3.4.4. I can see that you've gone back and forward between three different versions so can you please remove all the installations apart from that dated Mar 28 build 1478.
Everyone: please don't install old versions or run any software older than the most recent version, which is currently build 1478. Older versions are not going to work no matter what you do and it just makes my job much more difficult.
Everyone: please don't install old versions or run any software older than the most recent version, which is currently build 1478. Older versions are not going to work no matter what you do and it just makes my job much more difficult.
Hondata
Re: Problem Hondata Flashpro
I have the latest version from yesterday installed on my computer. I don't have any other version.Hondata wrote: ↑Sun Mar 29, 2020 9:44 am Bociak: your FlashPro is 3.5.4 but the last upload was from the older version 3.4.4. I can see that you've gone back and forward between three different versions so can you please remove all the installations apart from that dated Mar 28 build 1478.
Everyone: please don't install old versions or run any software older than the most recent version, which is currently build 1478. Older versions are not going to work no matter what you do and it just makes my job much more difficult.
Yesterday from morning to night I was thinking what to do to toss the map. So I installed 3.4.4 and newer. This morning I installed the second computer from March 28, 2020 and unfortunately it is the same as yesterday.
Re: Problem Hondata Flashpro
The last upload was made with 3.4.4. Can you try with 3.5.4 and send the feedback again?
Hondata
Re: Problem Hondata Flashpro
Bociak: Still shows as 3.4.4. I have fixed the problem for the S2000 and will do a build and release shortly. I suggest you get that version (3.5.5) and we'll see if that shows the right version.
M3AMI: Doing a build now to fix your problem.
Thanks for your patience.
M3AMI: Doing a build now to fix your problem.
Thanks for your patience.
Hondata
Re: Problem Hondata Flashpro
Hondata wrote: ↑Sun Mar 29, 2020 11:51 am Bociak: Still shows as 3.4.4. I have fixed the problem for the S2000 and will do a build and release shortly. I suggest you get that version (3.5.5) and we'll see if that shows the right version.
M3AMI: Doing a build now to fix your problem.
Thanks for your patience.
OKAY. I am just installing a new operating system on the laptop. So I'll wait with installing ManagerFlashPro to version 3.5.5.