ID1000 Injectors

FlashPro Manager software
Post Reply
ek9 ctr
Posts: 1
Joined: Mon Jun 10, 2019 10:30 pm

ID1000 Injectors

Post by ek9 ctr »

Hey guys,

I know this issue has been raised before about the ID1000 Injectors - sizing and voltage offset (opening/dead times) that are published by ID but do not necessarily react the way they should in the FlashPro manager.

Can anyone provide some voltage offset data and injector sizing based on varied fuel pressure values? Specifically, I am looking for data that correlates to 55 PSI base fuel pressure.

I've tried some of the published data on these injectors but the car ran terribly. Per the published data on ID1000s at 55 PSI base fuel pressure, the injector's size is 1135 cc/min with following offset values:

8 volts - 3015 microseconds
10 volts - 1815 "
12 volts - 1400 "
14 volts - 1055 "
16 volts - 820 "

Thanks in advance
Post Reply