Page 1 of 1

Boost control

Posted: Tue Aug 24, 2010 7:07 am
by Andros
Are there any plans on adding the boost control output for us flashpro users?
or is the hardware not compatible?

Posted: Tue Aug 24, 2010 9:49 am
by Spunkster
IT is not possible on the S2000 as there is no output on the ECU to do this.

Posted: Thu Dec 30, 2010 9:10 pm
by thesilverbullet
do you mean usable/spare outputs? there are lots of outputs on the ecu...

so nitrious controls is out as well?

Posted: Tue Jan 04, 2011 9:20 am
by Hondata
The Civic ECU had an unused PWM output which we could use for boost control, but there are no spare PWM outputs on the S2000 ECU.

Posted: Tue Jan 18, 2011 8:36 am
by Gernby
That's disappointing about the outputs. Would it be possible to have the ECU communicate with an external module via CAN, and utilize the external module for controlling nitrous and / or boost?

I developed a CAN based piggy back a few years ago, and it was surprisingly simple.

Posted: Tue Jan 18, 2011 9:30 am
by Hondata
It would be rather difficult and expense to do this for a small production run.

Posted: Tue Jan 18, 2011 9:54 am
by Gernby
But still worth it ... 8)

Maybe it could even control the iVTEC kit from DCraft.

Re: Boost control

Posted: Sat Jul 09, 2011 8:56 pm
by thesilverbullet
now that we have an option to add an pwm output, any plans on adding the nitrous control to flashpro manager?