Flashpro + Mac boost solenoid

FlashPro questions & answers specific to the 2006-2009 (US, UK, Asia) S2000
Post Reply
dermeister
Posts: 14
Joined: Tue Apr 13, 2010 6:05 am

Flashpro + Mac boost solenoid

Post by dermeister »

Hi,

Just made the car turbo, its an internal wastegate setup with a recently installed MAC solenoid. On your help file, the diagram is for an external setup, not internal. So I configured it as port 1 = breather filter , port 2 = internal wastegate, port 3 = turbo pressure.

On the flashpro should I select normally open or closed. Right now its set at normally open, but it wont boost more than 8psi (spring rate). Fixed duty was set at 70% - 80% with no change in boost.

I appreciate the help

Regards

User avatar
Spunkster
Site Admin
Posts: 18801
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Flashpro + Mac boost solenoid

Post by Spunkster »

Has your ECU been modified to add the components to the ECU for boost control?

dermeister
Posts: 14
Joined: Tue Apr 13, 2010 6:05 am

Re: Flashpro + Mac boost solenoid

Post by dermeister »

Yes. Ecu was sent and Everything is connected.

Today, I was making some tests and at 20% is boosting up. Apparently boost increases when decreasing the percent. I have boost cut feature active and selected "solenoid normally open", is this ok?

Regards

User avatar
Spunkster
Site Admin
Posts: 18801
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Flashpro + Mac boost solenoid

Post by Spunkster »

Is this a Hondata solenoid?

dermeister
Posts: 14
Joined: Tue Apr 13, 2010 6:05 am

Re: Flashpro + Mac boost solenoid

Post by dermeister »

No, Mac solenoid (identical one)

User avatar
Spunkster
Site Admin
Posts: 18801
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Flashpro + Mac boost solenoid

Post by Spunkster »

It may look the same but could be different internally. The one we offer is a normally closed solenoid.

dermeister
Posts: 14
Joined: Tue Apr 13, 2010 6:05 am

Re: Flashpro + Mac boost solenoid

Post by dermeister »

Including picture of solenoid
Attachments
image.jpg
image.jpg (74.76 KiB) Viewed 5000 times

User avatar
Hondata
Site Admin
Posts: 9278
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Flashpro + Mac boost solenoid

Post by Hondata »

That is not the same as a Hondata solenoid.
Hondata

Post Reply