reporting a possible problem

FlashPro questions & answers specific to the 2006-2009 (US, UK, Asia) S2000
Post Reply
andyroosim
Posts: 18
Joined: Wed Jul 09, 2014 9:07 am

reporting a possible problem

Post by andyroosim »

Hi, I'm just reporting something I noticed in the software. In the boost control section, when toggling between the mbar, bar, kpa, psi, kg/cm2 the "psi" value seems to be off. For example when a value of 1 is set for bar, the value of mbar, kpa, and kg/cm2 are consistent however psi shows a value of -0.19.
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: reporting a possible problem

Post by Hondata »

1 bar is not 1 atmosphere (1.01325 bar = 1 atmosphere)

Since psi is relative, not absolute, then psi = 1 bar - 1 atmosphere = 1 - 1.01325 * 14.6953 = -0.2
Hondata
andyroosim
Posts: 18
Joined: Wed Jul 09, 2014 9:07 am

Re: reporting a possible problem

Post by andyroosim »

i see. thanks for the clarification.
Post Reply