J37 DBW throttle body

FlashPro questions & answers specific to the 2006-2009 (US, UK, Asia) S2000
Post Reply
antkouv
Posts: 52
Joined: Fri Apr 26, 2013 10:58 am

J37 DBW throttle body

Post by antkouv »

Hello,

I have installed a J37 throttle body on my SC S2000 about 2 years ago. The setup included a big blow off valve. I have now changed the SC kit and have installedd the SOS kit which has a classic (small) BOV that redirects the air to the intake pipe. However, my idle is not good. The car behaves like it is drawing air after the TB (while it isnt). I have read other posts regarding the "Throttle flow vs opening" table adjustments and I am willing to try this out but it was not needed in my previous setup. Any suggestions? Do you think the size of the BOV plays a role?

One other thing. What is the min value that I should see in the Flashpro Manager when the pedal is at rest? 0%?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: J37 DBW throttle body

Post by Hondata »

Pedal should read 0% at the throttle released.

http://www.hondata.com/forum/viewtopic.php?f=29&t=18527
Hondata
antkouv
Posts: 52
Joined: Fri Apr 26, 2013 10:58 am

Re: J37 DBW throttle body

Post by antkouv »

Thank you for the info. I have already read all related posts though. Do you recommend trying to alter the "throttle vs air quantity" table? If so, in what steps?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: J37 DBW throttle body

Post by Hondata »

You could try increasing the values in that table, but you're probably aware of our position on throttle body swaps.
Hondata
Post Reply