Going back to stock re: CAN adapter

FlashPro questions & answers specific to the 2007-2008 US TSX
Post Reply
billj457
Posts: 2
Joined: Mon Jun 10, 2013 4:40 pm

Going back to stock re: CAN adapter

Post by billj457 »

Hello, I was wondering if I needed to re-pin my OBD2 port (2006 6MT) back to stock before or after swapping my stock ecu back in the car? Or could I just leave the CAN adapter hooked up?

Thanks!

User avatar
Spunkster
Site Admin
Posts: 18128
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Going back to stock re: CAN adapter

Post by Spunkster »

You can just leave it, it will not hurt anything.

billj457
Posts: 2
Joined: Mon Jun 10, 2013 4:40 pm

Re: Going back to stock re: CAN adapter

Post by billj457 »

Great, thanks for the quick reply.

cl9_TSX
Posts: 8
Joined: Mon Jan 13, 2014 10:59 pm

Re: Going back to stock re: CAN adapter

Post by cl9_TSX »

bump

My situation is a bit different from the OP. I don't have my original 04 ECU so I will need to buy a used one. Will the dealer still be able to do ecu - immobilizer sync process if I left the adapter in?

User avatar
Spunkster
Site Admin
Posts: 18128
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Going back to stock re: CAN adapter

Post by Spunkster »

Yes it will still work as it should.

Post Reply