2006 TSX At to MT Conversion

FlashPro questions & answers specific to the 2007-2008 US TSX
Post Reply
rherman_63
Posts: 5
Joined: Tue Oct 28, 2014 12:59 pm

2006 TSX At to MT Conversion

Post by rherman_63 »

Hello Hondata gurus...

I own the 06 AT and want to swap in an MT. Can I use the AT ECU, Dash and Engine Harness? Can I chip the AT ECU to ignore any errors or weird shift communique?

Or do I need the MT ECU, Dash and Engine Harnesses and immobilizer?

Thanks in Advance...Not a lot of info on this out there.

User avatar
Spunkster
Site Admin
Posts: 18128
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: 2006 TSX At to MT Conversion

Post by Spunkster »

I'm not sure what all would be involved, but there is nothing you can do with the 06 ECU you have. You would have to use an 07-08 ECU to use the FlashPro and you should use a manual version if you plan to do this.

rherman_63
Posts: 5
Joined: Tue Oct 28, 2014 12:59 pm

Re: 2006 TSX At to MT Conversion

Post by rherman_63 »

Spunkster wrote:I'm not sure what all would be involved, but there is nothing you can do with the 06 ECU you have. You would have to use an 07-08 ECU to use the FlashPro and you should use a manual version if you plan to do this.
Alright, thanks for the info Spunkster.

Post Reply