2008 TSX ECU Swap Questions

FlashPro questions & answers specific to the 2007-2008 US TSX
Post Reply
rherman_63
Posts: 5
Joined: Tue Oct 28, 2014 12:59 pm

2008 TSX ECU Swap Questions

Post by rherman_63 »

Hey guys, I started similar thread, but now after more research, I have a few questions.

I am going to be swapping an 08 ECU into my 06 TSX with flashpro to support my AT to MT transmission swap. I know now that with FlashPro you can use the 08 AT ECU and overwrite the factory AT basemap with a manual map. My question addresses the leftover wiring in the vehicle.

Since AT wiring has the TCU (transmission control unit) and various accompanying sensors, does the MT re-flash simply ignore the extra hardware in the vehicle (TCU, PRNDL switch, Ignition lockout)? I cant imagine I am the first person to come across this, and if so, lucky me. Any support would be appreciated.

Thank you!
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 2008 TSX ECU Swap Questions

Post by Spunkster »

Nothing beyond what is listed in the instructions is needed.
Post Reply