Accord 2.4 Europe Deatschwerks 1300cc
Posted: Wed Nov 11, 2015 12:57 pm
Hello,
After my Flashpro works with the second Ecu I have a new question /problem :)
I have a Accord 2.4 Europe k24a3
-200 cpi Cat
-3 inch exhaust
-AEM Universal High Flow 320 LPH Fuel Pump
The Car runs fine no errors
And my problem is I have Installed Deatschwerks 1300cc Injectors today after i installed them i upload the Tsx Deatschwerks 1300cc map on the Ecu and drived around.
I noticed that the car Idle is poor and the car is popping from the exhaust while idling and driving.
I checked error codes and got a error message Misfire Cylinder 3.
I changed the Injector from Cylinder 3 to 1 and from 1 to 3 :D and erased the error.
When i start the car i had the same Problems and looked after i have driven at the fault codes it say Misfire Cylinder 1.
I think my injector is broken but it´s new.
Could it be that the map is too rich ? so i get this error?
I had uploaded a datalog i hope i´ve done it right
The reason for the Injectors is i will turbo my car i have already the turbo and so on only need time for making the manifold.
Thank you for your time and help
After my Flashpro works with the second Ecu I have a new question /problem :)
I have a Accord 2.4 Europe k24a3
-200 cpi Cat
-3 inch exhaust
-AEM Universal High Flow 320 LPH Fuel Pump
The Car runs fine no errors
And my problem is I have Installed Deatschwerks 1300cc Injectors today after i installed them i upload the Tsx Deatschwerks 1300cc map on the Ecu and drived around.
I noticed that the car Idle is poor and the car is popping from the exhaust while idling and driving.
I checked error codes and got a error message Misfire Cylinder 3.
I changed the Injector from Cylinder 3 to 1 and from 1 to 3 :D and erased the error.
When i start the car i had the same Problems and looked after i have driven at the fault codes it say Misfire Cylinder 1.
I think my injector is broken but it´s new.
Could it be that the map is too rich ? so i get this error?
I had uploaded a datalog i hope i´ve done it right
The reason for the Injectors is i will turbo my car i have already the turbo and so on only need time for making the manifold.
Thank you for your time and help