Cl9 2003 immo a71

FlashPro questions & answers specific to the 2007-2008 US TSX
Post Reply
Schwx
Posts: 4
Joined: Sun May 03, 2020 8:36 am

Cl9 2003 immo a71

Post by Schwx »

It is possible to link the immobilizer of an ECU a71 without going to a workshop?

There's something to keep in mind when using an automatic ecu a71 in a manual vehicle as far as the immo is concerned?

Thanke you
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Cl9 2003 immo a71

Post by Spunkster »

No, only an Acura dealer will be able to match the key and immobilizer.
Schwx
Posts: 4
Joined: Sun May 03, 2020 8:36 am

Re: Cl9 2003 immo a71

Post by Schwx »

Spunkster

one question, it's normal that if I not pairing ecu in honda dealer, I will have problem with pairing flashpro with my ecu?

I pairing my ecu tsx with my car with oder diagnostic tool and working in the car without any problem but... Not pairing with flashpro.

Thanke you
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Cl9 2003 immo a71

Post by Spunkster »

Has the CAN adapter harness been installed correctly?
Schwx
Posts: 4
Joined: Sun May 03, 2020 8:36 am

Re: Cl9 2003 immo a71

Post by Schwx »

IMG_20200522_205632.jpg
IMG_20200522_205632.jpg (3.18 MiB) Viewed 6740 times
Yes

I can see that the ecu it's connected and the Vin number it's detected but the vehicle family and model its unknown
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Cl9 2003 immo a71

Post by Spunkster »

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
Schwx
Posts: 4
Joined: Sun May 03, 2020 8:36 am

Re: Cl9 2003 immo a71

Post by Schwx »

information has just been sent to Hondata support as requested.
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Cl9 2003 immo a71

Post by Hondata »

The FlashPro is communicating with the ECU but the ECU's EEPROM information is corrupt. It could be from cloning the ECU or reprogramming the immobilizer or programming the VIN or the ECU itself could be damaged.
Hondata
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Cl9 2003 immo a71

Post by Spunkster »

This is also being used in a vehicle that is not supported or designed to work with this.
Post Reply