Vtc 50 degree in k24a2

FlashPro questions & answers specific to the 2007-2008 US TSX
Post Reply
agithcl9
Posts: 1
Joined: Fri May 08, 2020 1:09 pm

Vtc 50 degree in k24a2

Post by agithcl9 »

Was wondering if you install a 50 degree vtc gear is a stock 07 tsx with a k24a2 motor, you can use the preinstalled calibration with the 45 degree cam angle to bring down the cam angle of the 50 degree
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Vtc 50 degree in k24a2

Post by Spunkster »

No, the cam gear must be modified with a mechanical stop inside so that it cannot over advance or it will damage the engine.
Post Reply