TC with other management system

User avatar
Spunkster
Site Admin
Posts: 18635
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: TC with other management system

Post by Spunkster »

ECUs will need an analog input / ignition retard table to use the Traction Control module.

dhrrx7
Posts: 5
Joined: Fri Jan 24, 2020 3:57 pm

Re: TC with other management system

Post by dhrrx7 »

To clarify, the AEM unit is the one built for the 06+ S2000 by Science of Speed. Here are the inputs supported.

INPUTS / OUTPUTS SUPPORTED
4 independent sequential injectors
4 independent ignition coils
3 available analog inputs (fuel pressure, oil pressure, boost position switch, traction control switch, etc)
2 available switched inputs (FlexFuel, traction control pulse converter input, etc)
1 available temperature input (oil temperature)
4 switched ground (boost control, traction control status lamp, traction control slip lamp, etc)
MIL (malfunction indicator lamp, aka "check engine lamp") through optional CAN Translator

It lists this feature which leads me to believe it can work with your unit.
"Advanced configurable traction control system (with optional signal converter)." Normally it would use the speed sensor in the transmission. Unfortunately we changed to a Quaife sequential transmission and lost that sensor.

User avatar
Spunkster
Site Admin
Posts: 18635
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: TC with other management system

Post by Spunkster »

I would suggest you discuss this with Science of Speed as they will know exactly what that AEM unit can and can't do.

dhrrx7
Posts: 5
Joined: Fri Jan 24, 2020 3:57 pm

Re: TC with other management system

Post by dhrrx7 »

I need to know what sort of output your T/C is going to provide to signal the ECU that there is wheel spin.
5v or variable voltage etc... It looks like the orange wire is the only signal wire on your unit.

Thanks for your help

User avatar
Spunkster
Site Admin
Posts: 18635
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: TC with other management system

Post by Spunkster »

It is 0-5 volt analog signal.

dhrrx7
Posts: 5
Joined: Fri Jan 24, 2020 3:57 pm

Re: TC with other management system

Post by dhrrx7 »

So the T/C unit will vary the 0-5v signal depending on slip? Thanks

User avatar
Spunkster
Site Admin
Posts: 18635
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: TC with other management system

Post by Spunkster »

correct.

dhrrx7
Posts: 5
Joined: Fri Jan 24, 2020 3:57 pm

Re: TC with other management system

Post by dhrrx7 »

Thanks

Post Reply