Traction Control help for DC2R

User avatar
Hondata
Site Admin
Posts: 8686
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Traction Control help for DC2R

Post by Hondata » Sun May 25, 2014 7:57 am

The calibration looks ok. Perhaps increase the retard at 10% slip from 20 to 40, and at 15% to 60 degrees, then change the rev limiter from 10% to 0% at 10%, and change the 40% to 10%
Hondata

Blulude98
Posts: 38
Joined: Fri Oct 23, 2009 4:11 am

Re: Traction Control help for DC2R

Post by Blulude98 » Sun May 25, 2014 5:37 pm

Hondata wrote:The calibration looks ok. Perhaps increase the retard at 10% slip from 20 to 40, and at 15% to 60 degrees, then change the rev limiter from 10% to 0% at 10%, and change the 40% to 10%
Sorry to bother you again but i am trying to make sense of the above, does this look right:
Attachments
TC PARAMETERS.png
TC PARAMETERS.png (31.59 KiB) Viewed 4254 times

User avatar
Hondata
Site Admin
Posts: 8686
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Traction Control help for DC2R

Post by Hondata » Sun May 25, 2014 8:38 pm

Yes, try that.
Hondata

Blulude98
Posts: 38
Joined: Fri Oct 23, 2009 4:11 am

Re: Traction Control help for DC2R

Post by Blulude98 » Mon May 26, 2014 2:06 am

Hondata wrote:Yes, try that.
Took the car out today with the above settings in the wet and it felt amazing so much traction and grip did exactly what is was designed to do.
Many thanks for all your help on this thread, keep up the good work Hondata and i will always buy your awesome products!

Post Reply