I recently installed the Traction Control unit on my turbo h23 VTEC honda prelude and have attached here a data log. I would appreciate any input folks may have on how the unit is responding to overslip conditions. Everything seems to be working correctly; I can certainly tell the ECU is responding with rev limits and timing retard. I'm curious from more experienced users of TC if there are fine tuning tips.
I'm running a target slip of 6%. My take away from the datalog is that I'm oscillating around that target a bit too much; swinging from 8-10% overslip down to 0%. I'm wondering what changes I should try to get the overslip to remain in the 4-8% range. Thanks in advance for any input.
Input welcome - TC performance log
Input welcome - TC performance log
- Attachments
-
- THT - 11.1.2019v1.skl
- (43.03 KiB) Downloaded 218 times
-
- 11.1.2019m.zip
- (1.72 MiB) Downloaded 231 times
Re: Input welcome - TC performance log
Forgot to attach *.tcc file associated with the previously posted datalog (datalog is in the *.zip file) and ECU file.
- Attachments
-
- THT first TC 10.26.2019.tcc
- (1.42 KiB) Downloaded 213 times
Re: Input welcome - TC performance log
For the benefit of others, I have attached here an updated *.tcc file along with my ECU calibration and a datalog in the zip file showing performance. These settings in the *.tcc file seem to work much better; less jerky with correcting slip events.
- Attachments
-
- THT - 11.4.2019v1.skl
- ECU calibration
- (43.03 KiB) Downloaded 222 times
-
- 11.4.2019m.zip
- datalog
- (2.32 MiB) Downloaded 217 times
-
- THT first TC 11.4.2019.tcc
- TCC calibration
- (1.41 KiB) Downloaded 218 times