Page 1 of 1

PRC KPRO + Traction Control

Posted: Mon Jun 03, 2013 11:25 pm
by dantok
Hey Guys,
I have the TC Unit, just wanted to make sure it will work with the PRC KPRO V3 ecu that i have.

Please advise :)

Re: PRC KPRO + Traction Control

Posted: Tue Jun 04, 2013 8:13 am
by Hondata
The PRC does not support the ELD input, which is the preferred TC input.

Re: PRC KPRO + Traction Control

Posted: Tue Jun 04, 2013 12:39 pm
by dantok
Yikes.
What are my options here? Am i able to buy a PRB ECU and transfer the traction control unit over?
Or can i use the other output available?

Sorry i`m a little lost, isn't the ELD input the same input for the O2 sensor?

Re: PRC KPRO + Traction Control

Posted: Wed Jun 12, 2013 9:27 am
by Spunkster
Correction, ELD input does work on a PRC. I tested this on the bench yesterday.

Re: PRC KPRO + Traction Control

Posted: Wed Jul 03, 2013 2:19 pm
by Knox
Spunkster wrote:Correction, ELD input does work on a PRC. I tested this on the bench yesterday.

So, prc ecus (also prd ecus) can use the traction control easyly ?

Re: PRC KPRO + Traction Control

Posted: Wed Jul 03, 2013 3:01 pm
by Spunkster
Yes they should work.