Page 1 of 1

no start with 4 bar map sensor

Posted: Sat Apr 21, 2018 5:58 pm
by redfg4si
just installed cte supercharger with a hondata 4 bar map and with the 4 bar the car will crank fire once and not start. car will start with the sensor unplugged but idle high. with the stock sensor the car starts right up and drives fine. tired a brand new hondata 4 bar and the car will still not start.

Re: no start with 4 bar map sensor

Posted: Sun Apr 22, 2018 9:16 pm
by Hondata
What does the sensor read with key on engine off?

Re: no start with 4 bar map sensor

Posted: Mon Apr 23, 2018 9:48 am
by Spunkster
What injectors are you using?

Re: no start with 4 bar map sensor

Posted: Mon Apr 23, 2018 7:50 pm
by redfg4si
using 1000cc DeatschWerks injectors. will have to check what the sensor reads and get back to you, and do you mean the reading in flashpro or voltage?

Re: no start with 4 bar map sensor

Posted: Tue Apr 24, 2018 10:18 am
by Spunkster
the reading in FlashPro manager when datalogging.