FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

2012+ US/Canadian Civic Si / 2013+ ILX
D-Rob
Posts: 61
Joined: Tue Apr 29, 2008 6:11 am

FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

Post by D-Rob » Wed Oct 24, 2018 7:49 am

Hello,

I have several clients that have updated calibrations using the 3.1.6.0 software and are receiving the P0128 (Coolant thermostat temperature check) DTC code despite it being disabled in the calibration for many months.

I've been explaining to said clients that they do not have a failing thermostat, and that this is a bug in the software.

User avatar
Spunkster
Site Admin
Posts: 17671
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

Post by Spunkster » Wed Oct 24, 2018 10:20 am

Can you post the calibrations that are having this issue?

D-Rob
Posts: 61
Joined: Tue Apr 29, 2008 6:11 am

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

Post by D-Rob » Wed Oct 24, 2018 4:32 pm

I can email them, if you'd like.

support@hondata.com?

User avatar
Spunkster
Site Admin
Posts: 17671
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

Post by Spunkster » Thu Oct 25, 2018 11:49 am

please send it as soon as possible

D-Rob
Posts: 61
Joined: Tue Apr 29, 2008 6:11 am

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

Post by D-Rob » Mon Oct 29, 2018 12:42 pm

Calibrations were sent a few days ago, by the way.

Thank you.

D-Rob
Posts: 61
Joined: Tue Apr 29, 2008 6:11 am

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

Post by D-Rob » Tue Nov 20, 2018 9:20 am

I see no mention of a fix in 3.1.8.

Should I tell the clients the error is still not addressed?

D-Rob
Posts: 61
Joined: Tue Apr 29, 2008 6:11 am

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

Post by D-Rob » Fri Nov 23, 2018 2:11 pm

I'd like to add that 2007 RDX also tosses P0128 when the second ECT sensor is disabled.

User avatar
Spunkster
Site Admin
Posts: 17671
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

Post by Spunkster » Tue Nov 27, 2018 11:32 am

please post the calibrations here as nothing has been received.

D-Rob
Posts: 61
Joined: Tue Apr 29, 2008 6:11 am

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

Post by D-Rob » Wed Nov 28, 2018 3:43 pm

An email was sent to support@hondata.com on Friday, October 26th that contained four calibrations.

It has been resent just now.

D-Rob
Posts: 61
Joined: Tue Apr 29, 2008 6:11 am

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

Post by D-Rob » Mon Jan 28, 2019 1:32 pm

Should I resent these to a different email?

User avatar
Spunkster
Site Admin
Posts: 17671
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

Post by Spunkster » Mon Jan 28, 2019 2:11 pm

Our software engineer is looking into this, but it may be a month or so before we are able to test in a vehicle.

ruddyrid
Posts: 11
Joined: Thu Dec 12, 2013 5:14 pm
Location: White Base
Contact:

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

Post by ruddyrid » Wed Jun 05, 2019 4:03 pm

Any update on this? Sucks to have to clear the code so often or having to deal with it coming on. Hopefully it's a simple enough fix
/ruddyrid

Kevvo21
Posts: 5
Joined: Sat Jun 22, 2019 11:03 pm

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

Post by Kevvo21 » Sat Jun 22, 2019 11:06 pm

Any updates?

I've had my coolant thermostat + coolant replaced, yet P0128 still pops up after 2 cold engine start cycles. Car idles fine, coolant temps are fine, not sure exactly why I'm getting this code. I've updated to the most recent update and re-uploaded my tune. I heard disconnecting my battery for an hour might help but i doubt it.

User avatar
Hondata
Site Admin
Posts: 8639
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

Post by Hondata » Mon Jun 24, 2019 9:55 am

What vehicle? Are you using ECT2 for an input?
Hondata

Kevvo21
Posts: 5
Joined: Sat Jun 22, 2019 11:03 pm

Re: FP Manager version 3.1.6.0: P0128 shows up when the DTC is disabled

Post by Kevvo21 » Mon Jun 24, 2019 3:02 pm

Hondata wrote:
Mon Jun 24, 2019 9:55 am
What vehicle? Are you using ECT2 for an input?
2014 civic si.
Tuner has my 'Second ECT sensor" disabled under the 'Misc' section, is that what's causing the issue?

I can disable 'Coolant Thermostat temp check (P0128) in 'Misc', but I wanted to leave that as a last resort. Since I just replaced my thermostat, I can disable that without having the worry that my thermostat was busted.

I can email you my calibration

Thanks,

Post Reply