How do I reduce the rev hang on my '12 Si?(bone stock)
Is there an option to select in Flashpro or is it one of the calibration files? If so does anyone know which one it is?
Rev Hang
Re: Rev Hang
Have you read the info in the help file: https://www.hondata.com/help/flashpro/r ... rev%2Bhang
Re: Rev Hang
I did.
I dont even know how to get to the screen pictured. I looked all over. Thats why I made a thread.
I dont even know how to get to the screen pictured. I looked all over. Thats why I made a thread.
Re: Rev Hang
Found it. For some reason when I clicked on Calibrations,nothing happened. I just got a blank screen. I had to close and reopen the program.
So after I uncheck the rev hang box, what do I do?
So after I uncheck the rev hang box, what do I do?
Re: Rev Hang
Nothing else you need to do. Just save the calibration and upload it to the ECU to remove the rev hang.
Re: Rev Hang
Is the disable rev-hang option available in the CARB version? I read the help document but it doesn't mention whether or not it's left out so I'm assuming it's included in the CARB version.
I only have a K&N SRI and a FKX (13' Si) so I want to take advantage of those small mods even if it's not custom to my exact vehicle. The car seems to run fine as is, but I would hope one of the base maps would optimize it a bit at least.
I only have a K&N SRI and a FKX (13' Si) so I want to take advantage of those small mods even if it's not custom to my exact vehicle. The car seems to run fine as is, but I would hope one of the base maps would optimize it a bit at least.
Re: Rev Hang
You cannot disable rev hang on a CARB calibration as it will effect emissions.
-
- Posts: 33
- Joined: Thu May 14, 2020 5:13 am
Re: Rev Hang
you can also adjust the fuel cut off time for each gear that drops the RPM lower aswell,
Message me and i can help you with it, I prefer mine a little fast but some fine it to aggressive
Message me and i can help you with it, I prefer mine a little fast but some fine it to aggressive