FlashPro Manager 3.6.4.0

2012+ US/Canadian Civic Si / 2013+ ILX
Post Reply
OkayJunior
Posts: 5
Joined: Fri Sep 11, 2020 7:28 pm

FlashPro Manager 3.6.4.0

Post by OkayJunior »

Installed both Manager and USB Driver. Opened as administrator. Yeah it gives me the pop up window “The FlashPro firmware will be upgraded.” I did the whole disconnect/reconnect usb thing and both driver and flashpro are green checked. I press OK, and I click anywhere and it “Not Responding”
OkayJunior
Posts: 5
Joined: Fri Sep 11, 2020 7:28 pm

Re: FlashPro Manager 3.6.4.0

Post by OkayJunior »

Deleted/uninstalled FlashPro and reinstalled it all over. Working fine now. Can anyone help with a calibration?

2012 Civic Si
Skunk2 CAI
Skunk2 megapower rr exhaust
Skunk2 Header/Downpipe
Grams Performance 1000cc Fuel Injectors
Grams Performance 72mm Drive-By-Wire Throttle Body
Skunk2 manifold
OkayJunior
Posts: 5
Joined: Fri Sep 11, 2020 7:28 pm

Re: FlashPro Manager 3.6.4.0

Post by OkayJunior »

When trying to upload a new calibration a pop up ERROR says “You cannot upload a ‘Unkown’ calibration to a ‘Civic Si 2012 US’ FlashPro

When I click ‘Show Last Upload Status’ it says the last FlashPro upload succeeded.
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: FlashPro Manager 3.6.4.0

Post by Spunkster »

How are you opening the calibration you are trying to use?
OkayJunior
Posts: 5
Joined: Fri Sep 11, 2020 7:28 pm

Re: FlashPro Manager 3.6.4.0

Post by OkayJunior »

The regular tab “new calibration” and choose. Is there a proper way?
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: FlashPro Manager 3.6.4.0

Post by Spunkster »

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
OkayJunior
Posts: 5
Joined: Fri Sep 11, 2020 7:28 pm

Re: FlashPro Manager 3.6.4.0

Post by OkayJunior »

Updated to the new firmware. Uploaded a calibration. Car works hella nice than before! Question. Is it possible to upload two calibrations with different cc injectors?
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: FlashPro Manager 3.6.4.0

Post by Spunkster »

Why would you want to upload calibrations with 2 different sized injectors?
Post Reply