Page 1 of 1

help with stock calibration

Posted: Wed Nov 28, 2012 8:31 pm
by 08_Fiji_Fit
hello i have a 2008 honda fit sport automatic and i just got my flashpro today and i locked it to my vehicle with no problem but when i installed the stock base calibration i ran into a problem. After i flashed it i turned the car on and when i stepped on the gas i get no response. i have to fully step on the gas pedal all the way down for the rpm's to even move.

I also loaded the stock calibration for the 07 fit sport with that one installed the car responds fine but i cant get it out park wtf!!!!!

i need help on whats happening here.

PLEASE look at the datalog i made on what i mean i press the gas pedal and no response.

Re: help with stock calibration

Posted: Thu Nov 29, 2012 9:03 am
by Hondata
It sounds like a MT calibration in the AT vehicle. First re-download and install FlashProManager from http://www.hondata.com/forum/viewtopic.php?f=29&t=14780. Make sure that your FlashPro is plugged in the first time you open the calibration, then it should select the AT calibration.

Re: help with stock calibration

Posted: Thu Nov 29, 2012 11:14 am
by 08_Fiji_Fit
Going to try that out

Re: help with stock calibration

Posted: Thu Nov 29, 2012 11:27 am
by 08_Fiji_Fit
ok just did what you said and nothing same problem accours.

Re: help with stock calibration

Posted: Thu Nov 29, 2012 12:34 pm
by Spunkster
Later this afternoon you should be able to redownload the software and install it and that should resolve the issue.

Re: help with stock calibration

Posted: Thu Nov 29, 2012 1:14 pm
by 08_Fiji_Fit
sweet thank you

Re: help with stock calibration

Posted: Thu Nov 29, 2012 5:29 pm
by Spunkster
You should now be able to redownload the beta version of software from the downloads section of the website, install it, and it should work.

Re: help with stock calibration

Posted: Thu Nov 29, 2012 7:13 pm
by 08_Fiji_Fit
I'm currently at work I will try again tomorrow morning.

Re: help with stock calibration

Posted: Fri Nov 30, 2012 3:50 pm
by 08_Fiji_Fit
now its working right thank you hondata