Injector Dead Time

Post Reply
ALS2386
Posts: 4
Joined: Tue Nov 27, 2012 11:02 am

Injector Dead Time

Post by ALS2386 » Mon Jan 18, 2016 11:32 pm

Hi,

I was setting my Hondata Mobile App v1.2 and it ask for injector dead time. What is the exact amount to put there?

Just in case, I have the K20Z3 turbo with DW800cc injectors, a Wallbro 255 fuel pump, and CT Engineering modified stock fuel pressure regulator(which add 10psi) for a total of 63psi

User avatar
Spunkster
Site Admin
Posts: 16912
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Injector Dead Time

Post by Spunkster » Tue Jan 19, 2016 10:25 am

Use whatever dead times you have set in your calibration.

ALS2386
Posts: 4
Joined: Tue Nov 27, 2012 11:02 am

Re: Injector Dead Time

Post by ALS2386 » Tue Jan 19, 2016 11:26 am

As I compare now, my current calibration is a base DW800 but with gas tables modified. The injector dead time(IDT) are the same.

Can you tell me if this DW800 base calibration IDT numbers are suppose to be the same for my car with all the previous mentioned set up, or the IDT numbers should change?

User avatar
Spunkster
Site Admin
Posts: 16912
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Injector Dead Time

Post by Spunkster » Tue Jan 19, 2016 11:41 am

If it has been tuned with those dead times you should leave it alone or you will have to retune.

Post Reply