DTC P0034 disable option

FlashPro questions & answers specific to the 2007-2012 Acura RDX
Post Reply
Kenb350z
Posts: 5
Joined: Mon Dec 15, 2014 4:42 am

DTC P0034 disable option

Post by Kenb350z » Thu Oct 01, 2015 9:59 pm

I was wondering if it were possible to disable this DTC for those of use running aftermarket turbos?

User avatar
Hondata
Site Admin
Posts: 8578
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: DTC P0034 disable option

Post by Hondata » Fri Oct 02, 2015 7:42 am

Is it possible to plug in the valve / actuator?
Hondata

Kenb350z
Posts: 5
Joined: Mon Dec 15, 2014 4:42 am

Re: DTC P0034 disable option

Post by Kenb350z » Fri Oct 02, 2015 2:02 pm

I currently do not have the valve / actuator. The sensor is still plug in; however, the valve/actuator is not connected. Do you think having a valve / actuator connected will help?

User avatar
Hondata
Site Admin
Posts: 8578
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: DTC P0034 disable option

Post by Hondata » Fri Oct 02, 2015 2:11 pm

Yes. The error is low or high voltage, and with something plugged in it might go away.
Hondata

Kenb350z
Posts: 5
Joined: Mon Dec 15, 2014 4:42 am

Re: DTC P0034 disable option

Post by Kenb350z » Fri Oct 02, 2015 2:42 pm

Where would you recommend I run the hose's. The actuator sensor is plugged in, but there are no hose's running off of it. I think it is looking for boost or some kind of flow. The turbo boost sensor is fine, it is plugged into the BorgWarner.
Attachments
IMAG2552.jpg
IMAG2552.jpg (2.61 MiB) Viewed 3122 times
Screen shot 2015-10-02 at 4.34.57 PM.png
Screen shot 2015-10-02 at 4.34.57 PM.png (77.65 KiB) Viewed 3122 times

Post Reply