Speed density fueling

FlashPro questions & answers specific to the 2007-2012 Acura RDX
the_wrench116
Posts: 35
Joined: Wed Mar 12, 2014 4:20 pm

Speed density fueling

Post by the_wrench116 » Tue Apr 24, 2018 2:09 pm

Is there a time line for speed density and a box to check to turn off the cel for maf over voltage?

User avatar
Hondata
Site Admin
Posts: 8757
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Speed density fueling

Post by Hondata » Thu Apr 26, 2018 6:15 am

For what year?
Hondata

Bills07si
Posts: 28
Joined: Sun Nov 06, 2011 3:27 pm

Re: Speed density fueling

Post by Bills07si » Fri May 11, 2018 10:05 am

Hondata wrote:
Thu Apr 26, 2018 6:15 am
For what year?
07-12. As we are waiting there is starting to be list of guys waiting for speed density tuning. Myself. Joshua . Ryan . Roy and im sure more . Ken gave up on you all (tired of waiting) and just went Motec with Vit but thats not even a option for the average guy. Could you please update us?

Nolacivicrdx
Posts: 2
Joined: Fri May 11, 2018 12:04 pm

Re: Speed density fueling

Post by Nolacivicrdx » Fri May 11, 2018 12:16 pm

Yes we need more help with this tuneing software. There is a lot of us work here with the 2007 to 2012 turbo RDX awd that need more to play with to open up these SUV... so last get some stuff open so we can make more power with new Options

the_wrench116
Posts: 35
Joined: Wed Mar 12, 2014 4:20 pm

Re: Speed density fueling

Post by the_wrench116 » Fri May 11, 2018 12:23 pm

Yes mine is an 08 and I’d like to help test if your willing to work with me.

User avatar
Hondata
Site Admin
Posts: 8757
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Speed density fueling

Post by Hondata » Fri May 11, 2018 3:51 pm

We have almost competed the speed density fuel maps for the RDX. 07-08 and 10-14, so all the RDXs that we support. ETA for release is next week.

Step 1 is for people to test using the existing AFM/MAF based tuning to make sure nothing has changed.

Step 2 involves tuning the fuel tables, which is going to involve some work because we don't have any starting fuel tables with these vehicles.
Hondata

User avatar
Hondata
Site Admin
Posts: 8757
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Speed density fueling

Post by Hondata » Fri May 11, 2018 3:52 pm

the_wrench116 wrote:
Tue Apr 24, 2018 2:09 pm
a box to check to turn off the cel for maf over voltage?
If it is from the AT ECU, then it will still get that error. We can only work with the PGMFI ECU.
Hondata

the_wrench116
Posts: 35
Joined: Wed Mar 12, 2014 4:20 pm

Re: Speed density fueling

Post by the_wrench116 » Sun May 13, 2018 1:23 pm

Well I’m central pa want to include Derek in this and I’ll see what happens.?.

The current theory is that the transmission will not care the engine won’t be able to set a code for the transmission and once the engine is on SD it won’t care about maf voltage.

D-Rob
Posts: 61
Joined: Tue Apr 29, 2008 6:11 am

Re: Speed density fueling

Post by D-Rob » Tue May 15, 2018 9:14 am

Josh,

I think a stock car with just a tune is probably the best thing to test with at first.

But I'm open to test it out, of course. It only helps my customers. I would have to see what I have available in my schedule to do so, though. This time of the year is very busy.

the_wrench116
Posts: 35
Joined: Wed Mar 12, 2014 4:20 pm

Re: Speed density fueling

Post by the_wrench116 » Tue May 15, 2018 2:44 pm

ill ask around and see if anyone is willing to donate an RDX for a few hours if that will help out. its a shame ryan isnt closer. hes not stock but at least hes stock turbo...

User avatar
Hondata
Site Admin
Posts: 8757
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Speed density fueling

Post by Hondata » Wed May 16, 2018 2:11 pm

First I would people to test this with the speed density disabled to check that the AFM fueling is unchanged. If you are leaving feedback then please provide the calibration & datalog if applicable. Or at the very least, the ECU part # as there are different ECUs.

Note that we are not going to create a FlashPro for the automatic transmission ECU. It has been assured in these threads that the AT ECU will cope with the AFM going over range, but if that is not the case you will have to work around the limit in some other way.
Hondata

Bills07si
Posts: 28
Joined: Sun Nov 06, 2011 3:27 pm

Re: Speed density fueling

Post by Bills07si » Thu May 17, 2018 4:15 am

Awesome. Thank you so much.

Gearhead98
Posts: 9
Joined: Fri Jan 22, 2016 3:06 pm

Re: Speed density fueling

Post by Gearhead98 » Sun May 27, 2018 12:22 pm

I have some logs from the version that included the speed density option. I can attach logs but would prefer to send the actual calibration to you guys directly.
Attachments
Speed density test..fpdl
(98.52 KiB) Downloaded 64 times

Gearhead98
Posts: 9
Joined: Fri Jan 22, 2016 3:06 pm

Re: Speed density fueling

Post by Gearhead98 » Tue Jun 05, 2018 9:00 pm

Here is a quick log from the car running on 100% speed density. Minimum pressure for speed density was set at 0. Speed density low fuel tables were adjusted to get the car to idle and no other tables were adjusted.
Attachments
Speed density test - Full speed density.fpdl
(7.43 KiB) Downloaded 69 times

DomGSR-T
Posts: 60
Joined: Sat Apr 06, 2013 12:53 am

Re: Speed density fueling

Post by DomGSR-T » Tue Jun 12, 2018 9:56 pm

Hi!

Just to be sure, If I want to use the map based fuel feature, do I need to leave the AFM check box checked AND the MAP check box check too? It's says to not disable or remove AFM and I'm not 100% sure of the ''do not disable'' meaning :)

BTW, thanks hondata for that great new features!

Post Reply