TUNGSTEN W and Palmlog issue

HondaLogger datalogging software questions and answers.
Locked
QUICKSILVER RACING
Posts: 351
Joined: Fri Aug 16, 2002 10:45 pm
Location: PHILIPPINES
Contact:

TUNGSTEN W and Palmlog issue

Post by QUICKSILVER RACING » Mon Nov 10, 2003 9:53 pm

I have a PALM TUNGSTEN W and a markspace cable.

I coundn't connect to the interface box.
HONDATA official and sole Distributor in the Philippines.
http://quicksilver.4t.com
+639178954747

User avatar
Hondata
Site Admin
Posts: 8774
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Palm cable

Post by Hondata » Tue Nov 11, 2003 8:51 am

Which cable do you have? I don't think markspace makes the correct cable for the Tugsten. The cable should be a modem cable, 9 pin, powered from the Palm, and must have electronics inside the cable to convert the voltage levels.
Hondata

QUICKSILVER RACING
Posts: 351
Joined: Fri Aug 16, 2002 10:45 pm
Location: PHILIPPINES
Contact:

Post by QUICKSILVER RACING » Tue Nov 11, 2003 7:00 pm

I was thinking that. but availability of cables here are NIL. Best thing is to purchase the cable from you.
HONDATA official and sole Distributor in the Philippines.
http://quicksilver.4t.com
+639178954747

QUICKSILVER RACING
Posts: 351
Joined: Fri Aug 16, 2002 10:45 pm
Location: PHILIPPINES
Contact:

Post by QUICKSILVER RACING » Tue Nov 11, 2003 7:01 pm

electronics as in RS 232?
HONDATA official and sole Distributor in the Philippines.
http://quicksilver.4t.com
+639178954747

QUICKSILVER RACING
Posts: 351
Joined: Fri Aug 16, 2002 10:45 pm
Location: PHILIPPINES
Contact:

Post by QUICKSILVER RACING » Tue Nov 11, 2003 7:36 pm

I checked my cable again and I also checked Mark space.

They have a DCU-m9 modem cable which is the one that I ordered. I think they sent me the wrong cable DCU-H9 which is the Hotsync serial cable.

I will order it through you guys.
HONDATA official and sole Distributor in the Philippines.
http://quicksilver.4t.com
+639178954747

QUICKSILVER RACING
Posts: 351
Joined: Fri Aug 16, 2002 10:45 pm
Location: PHILIPPINES
Contact:

Post by QUICKSILVER RACING » Thu Nov 27, 2003 7:42 am

I have bought the correct cable from Pcables.com.

I still couldn't connect to the Interface box.

I don't know why.
HONDATA official and sole Distributor in the Philippines.
http://quicksilver.4t.com
+639178954747

hondahatch
Posts: 27
Joined: Fri Dec 24, 2004 1:26 am

M505/Tungsten

Post by hondahatch » Mon Mar 28, 2005 6:59 am

QuickSilver

Does the Palm 505 has RS-232 level pin out ? Or is it TTL like the Visor ?
I notice that the Tungsten uses the same connector as the Tungsten and wondering whether you get Palmlog to work on your Tungsten ?
What cable did you use ?
Does it have any TTL to RS232 level conversion on the cable you use ?

Many thanks

Locked