Please verify if this is a 2b w/datalog

HondaLogger datalogging software questions and answers.
Locked
leed
Posts: 7
Joined: Thu Apr 10, 2003 4:43 pm
Location: Bellingham, WA

Please verify if this is a 2b w/datalog

Post by leed » Thu Apr 17, 2003 11:51 am

I purchased this used. Was told it was a 2b w/ datalog, but cannot connect. Tried all port settings (1-4, flowcontrol, FIFO buffer, etc...)
When I select ECU information, I get "communication error"
Sometimes get a popup: "This system does not have datalogging enabled"
Using Hondalogger ver 3.0.8.0


Image

Image

Please excuse the camcorder capture quality. :oops:

TIA,
Dave

Ok, pics should work now.
Last edited by leed on Thu Apr 17, 2003 5:25 pm, edited 1 time in total.

pills_PMD
Posts: 165
Joined: Sun Aug 18, 2002 6:07 pm
Contact:

Post by pills_PMD » Thu Apr 17, 2003 2:32 pm

no pictures are present

QUICKSILVER RACING
Posts: 351
Joined: Fri Aug 16, 2002 10:45 pm
Location: PHILIPPINES
Contact:

Post by QUICKSILVER RACING » Thu Apr 17, 2003 8:49 pm

stage 2 WITH BOOST AND NO DATALOGGING.

2BN

serial NUMBER SHOULD BE 2BDXXXX
HONDATA official and sole Distributor in the Philippines.
http://quicksilver.4t.com
+639178954747

leed
Posts: 7
Joined: Thu Apr 10, 2003 4:43 pm
Location: Bellingham, WA

Post by leed » Thu Apr 17, 2003 9:28 pm

Not happy w/ that. But what can I do?? lol
When i received this Hondata, there was a receipt included from Hondata indicating the previous owner had purchased a Max232 Datalogging chip.
Is this not present on the board?

Thanks for the help,
Dave

User avatar
Spunkster
Site Admin
Posts: 18080
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Fri Jun 27, 2003 4:37 pm

Download the most recent version of Hondalogger, and then go tot the ECU button and make sure you have it set to OBD1 version 2.5

Locked