Hondata

Is there a way you can make a dual flash like +6/+9 or +6 /+6e85 or +9/+6 e85 with the stock and sport mode. thank you

Curious to still know as well

The only way to do it is adjust the TQ tables

IF you put 250nM, I believe that's around 20psi

Nope torque tuning is to adjust the torque nothing to do with boost. Boost is the TC Maximum Pressure Ratio. But don't think a dual tune is possible as of right now.

Lilwonton17 wrote: ↑Wed Jun 13, 2018 1:34 pm Nope torque tuning is to adjust the torque nothing to do with boost. Boost is the TC Maximum Pressure Ratio. But don't think a dual tune is possible as of right now.

You do know that the TQ is controlled by boost/TPlate.
To limit the TQ, it has to lower the boost command/TPlate

oh idk lol I have a personal tuner to do that for me. But on my SI both normal and sport are already set at 650nm to need to lower it.

So I did do as suggested above with the torque settings and it does work. It takes some driving before the ecu learns the trims but when you check the box to have the torque separate you can tell. In my car it still hit the high boost but the torque was lower.