can anyone help me with my AFM
-
- Posts: 25
- Joined: Mon Jul 15, 2019 10:06 am
can anyone help me with my AFM
i am not 100% sure if i am tunning my AFM tables correctly . not sure if i am changing the right G/S numbers. would really appreciate some help.
2017 civic si coupe running +6psi FTS with a K&N short ram intake
2017 civic si coupe running +6psi FTS with a K&N short ram intake
- Attachments
-
- sep 18 m.zip
- (2.81 MiB) Downloaded 128 times
-
- sep 18 m.fpdl
- (2.82 MiB) Downloaded 125 times
Re: can anyone help me with my AFM
Hey Alex,
I would start by adjusting your AFM by +3 on 0-10 g/s and +5 on 10.01-60 g/s
Upload, datalog and fine tune it by adjusting into small g/s clusters.
I would start by adjusting your AFM by +3 on 0-10 g/s and +5 on 10.01-60 g/s
Upload, datalog and fine tune it by adjusting into small g/s clusters.
-
- Posts: 25
- Joined: Mon Jul 15, 2019 10:06 am
Re: can anyone help me with my AFM
for example i start with 0.52 all the way to 10... +3
- Attachments
-
- test.png (113.87 KiB) Viewed 3096 times
Re: can anyone help me with my AFM
Yes, highlight all cell on that range and adjust by +3.
-
- Posts: 25
- Joined: Mon Jul 15, 2019 10:06 am
Re: can anyone help me with my AFM
Thank you I did a data log this morning I will post it later on today. I am still unsure how to read the graph should I be looking at the line in the middle that varies or should I be looking at the red spots? I'm not too sure what you mean by fine tune it by adjusting into small g/s clusters.
-
- Posts: 25
- Joined: Mon Jul 15, 2019 10:06 am
Re: can anyone help me with my AFM
Thank you I did a data log this morning I will post it later on today. I am still unsure how to read the graph should I be looking at the line in the middle that varies or should I be looking at the red spots? I'm not too sure what you mean by fine tune it by adjusting into small g/s clusters.
Re: can anyone help me with my AFM
To clarify adjust by percent (ie: +3%). Usually make half the desired change and retest.
Re: can anyone help me with my AFM
The +3 is rough estimate of the average you need to trim in the AFM from the given range. See how the car reacts to this and re test. From there you may calibrate your AFM by smaller clusters.
-
- Posts: 25
- Joined: Mon Jul 15, 2019 10:06 am
Re: can anyone help me with my AFM
I am still unsure how to read the graph should I be looking at the line in the middle that varies or should I be looking at the red spots?
Re: can anyone help me with my AFM
The blue line represents the median average of all the little red marks. If it is a strong cluster of a bunch of data points use the line reference. If its sporadic little ones (unless a small cluster are together) then use your best judgement. Essentially the more data points make the blue line more accurate of a suggestion.
Re: can anyone help me with my AFM
Dont look at the red dots or you will go crazy lol!
-
- Posts: 25
- Joined: Mon Jul 15, 2019 10:06 am
Re: can anyone help me with my AFM
the drive feels better but my LTFT is high now
- Attachments
-
- sep 20 n.fpdl
- (1.86 MiB) Downloaded 107 times
-
- sep 20 m.fpdl
- (3.22 MiB) Downloaded 106 times
Re: can anyone help me with my AFM
You are still running lean. Adjust 0 g/s - 10 g/s by +3 and 10.01 g/s onwards by +4.
Goodluck!
Goodluck!
-
- Posts: 25
- Joined: Mon Jul 15, 2019 10:06 am
-
- Posts: 25
- Joined: Mon Jul 15, 2019 10:06 am