Help please,
Please tell me how to install the correct calibration for my vehicle. The TCM was recently changed, and as per your board, it is clear I need to install the 2017 calibration now that the dealer flashed the firmware after changing the TCM.
When I select Model 'Civic 1.5T (2016+)' my options for available vehicles include a bunch of options, none of which match exactly to a 2017 version of an EX-T coupe. Regardless, I choose the 'Civic 1.5T US 2017 Hatch CVT', I then chose the Calibration, Name: 'Civic-Turbo-2016-2-Tuned-High' and Description: 'Civic Turbo CVT 2016, +6 psi high octane' - but received this message when trying to upload...
You cannot upload a 'Civic 1.5T US Hatch LX CVT' calibration to a Civic 1.5T 2016 CVT' FlashPro.
Please help me to find and load the correct calibration for my issue and how to get my FlashPor to accept it, thanks.
-Greg
2016 Civic 1.5 CVT EX-T Coupe
Re: 2016 Civic 1.5 CVT EX-T Coupe
Are you opening the calibration with the FlashPro plugged in?
Why are you loading a hatch calibration when you have a coupe?
Set the vehicle to 'Civic 1.5T US 2016-2017 CVT' and then load a calibration.
Why are you loading a hatch calibration when you have a coupe?
Set the vehicle to 'Civic 1.5T US 2016-2017 CVT' and then load a calibration.
Hondata
Re: 2016 Civic 1.5 CVT EX-T Coupe
I did load the 2016-2017 calibration after sending my original post, that worked. After driving for a day I ended up getting the U0301 code, I cleared the code and it unsurprisingly came back the next. Can you please tell me how to adjust the calibration to prevent this code? I live in Portugal and am using E5 95 octane Galp gasoline, so I am not sure about ethanol content, but I believe it to be 5% ethanol.
Any help would be appreciated as the U301 code lights up most of the diagnostic lamps, thanks.
Any help would be appreciated as the U301 code lights up most of the diagnostic lamps, thanks.
Re: 2016 Civic 1.5 CVT EX-T Coupe
I think you'd better tell us exactly what the ECU part number is and what the stock calibration id was, and then show us a screen shot of what you're trying to load. Feedback would work too.
Hondata