P0103 Error

FK2 Civic Type R 2015-2017, FK8 Civic Type R 2017-2021, FL5 Civic Type R 2023+ and Integra Type S 2024+
Post Reply
chris2000
Posts: 56
Joined: Thu Oct 05, 2006 6:35 pm
Location: Asia

P0103 Error

Post by chris2000 »

Hi

I have been getting this code P0103 on the FK8R recently. Even though i the code delete had been tick on the MOD section it still happens and put the car into limp mode.

It happened after I installed a Mishimoto intake and use a new base map for retune. Thinking it was a bad install, we open the intake to check again and all good. Then think maybe was a bad base map so we use the earlier tune map again to retune on the dyno from there, but after testing the car on the road it still give a P0103 even though it is disable in the MOD section.

One more thing is we added 2-5% on the AFM calibration.

Can see what could i have done wrong? owner is not very happy with this code cause it goes into limp.

Thanks.

Chris
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: P0103 Error

Post by Hondata »

This has been addressed and will be in the next release.
Hondata
Post Reply