Throtle Plate closes at 29 psi
Throtle Plate closes at 29 psi
Hello need some help, i have a FK8 2017 with hybrid turbo , hondata fuel system , IC forge with hondata Flashpro, i have meth injection also , but i have some issues with the throtle plate closing even when i disable traction control , i already try to desable all functions that i now in flaspro but stil having a closed T.Plate at about 6000 rpm for about half a second than goes normal. Only happens in 4 gear and 5 gear in 6 i didnt try it, in 4, 5, 6 i am asking more torque could this be related to boost control....
Re: Throtle Plate closes at 29 psi
In attach the screen shot
- Attachments
-
- FK8 throtle closing.png (47.09 KiB) Viewed 993 times
Re: Throtle Plate closes at 29 psi
Here the full LOG
- Attachments
-
- datalog0009.fpdl
- (1.54 MiB) Downloaded 77 times
Re: Throtle Plate closes at 29 psi
Post the calibration as well
Re: Throtle Plate closes at 29 psi
Here it is
- Attachments
-
- FK8 550NM+20 CAM+11.50 O2 +912º IGN tc off.fpcal
- (18.33 KiB) Downloaded 78 times
Re: Throtle Plate closes at 29 psi
I think the 4+% wheel slip is making the VSA apply a reduction in torque which is triggering this.
If you increase all the pressure ratios tables to their maximum then various PID controls will go strongly negative, and then if the ECU makes any sort of slight torque reduction you can get these large target torque drops.
If you increase all the pressure ratios tables to their maximum then various PID controls will go strongly negative, and then if the ECU makes any sort of slight torque reduction you can get these large target torque drops.
Hondata
Re: Throtle Plate closes at 29 psi
What's your advice that I should do?