2019 2.0t 6 speed
Rv6
Borla catback
Afe intake
Car is custom dyno tuned 290whp and 357wtrq
Running perfect no loss on power but these annoying codes popped up
P0139- o2 sensor slow response Bank 1
P0113- intake air temperature circuit high input
I reset them both and cleaned the intake air sensor with maf cleaner which could of been from the oiled afe intake
2019 2.0t 6 speed p0139 and p0113 codes
Re: 2019 2.0t 6 speed p0139 and p0113 codes
You will need to follow the factory troubleshooting steps for the IAT error, and have you tried disabling the secondary O2 sensor?
Re: 2019 2.0t 6 speed p0139 and p0113 codes
Are these errors related to each other?
I received both around 50miles after my dyno tune.
I received both around 50miles after my dyno tune.
Re: 2019 2.0t 6 speed p0139 and p0113 codes
Probably not.
-
- Posts: 18
- Joined: Wed Aug 12, 2020 4:15 pm
Re: 2019 2.0t 6 speed p0139 and p0113 codes
bout to install prl downpipe, front pipe and intercooler and im sure ill get a check engine light. they told me to check the secondary o2 sensor off? where do i do that?
Re: 2019 2.0t 6 speed p0139 and p0113 codes
It is in the closed loop section of the calibration window.
-
- Posts: 18
- Joined: Wed Aug 12, 2020 4:15 pm
Re: 2019 2.0t 6 speed p0139 and p0113 codes
nvm, i found it!
-
- Posts: 18
- Joined: Wed Aug 12, 2020 4:15 pm
Re: 2019 2.0t 6 speed p0139 and p0113 codes
is there any in particular i should be changing on the calibration with the intercooler, frontpipe and downpipe installed? trying to maximize power but more importantly reliability.
thanks!
thanks!