Alright I have a 95 Accord lx, the motor in it is a sohc F22b2, I bought a F22b Dohc Jdm originally in a prelude si I believe, I just bought an ecu, I know I need to change the driver side motor mount.
Can anyone help with a list of things I will need?
Has anyone done this swap before?
I heard I need to buy an axle from the prelude because of the length of the axle I have now.
Will my original transmission swap right to it, I have been told that it will.
Post your non-Hondata questions / problems here.
2 posts • Page 1 of 1
You can use either the accord or prelude axle on the passenger side.But on the drivers side if you want to use the accord axle, you need to use the accord intermediate shaft. Same goes if you want to use prelude axles on drivers side. I did a similar swap in my 96 accord a few years back, I used an H23a1 but they are identical as far as bolting in. Any H or F series transmissions will bolt right u. (Aside frim a F20C tranny from an S2000. I know this post is over a year and a half old, but I'm new to this forum so I thought I would give my 2 cents lol. Let me know if you still need help